SoCal Green Roofing Of Los Angeles
License# 1057764
Serving in Los Angeles & Surrounding Areas
License# 1057764

Can A Roof Be Insulated After Renovating Itself In Bellflower?

Whether you are planning to rebuild your house or just want to fix your roof there are questions about insulating your attic. There are several aspects to be aware of, such as maintaining the proper height of the base flashing, assuring proper insulation and ventilation, and determining the amount of insulation needed.

Are your roofing materials in good shape now? This could be the ideal time you should opt for Reroofing in Bellflower! SoCal Green Roofing is here to help you with your Reroofing in Bellflower needs at a low cost!

Insulate the attic

If you’re re-rooving your attic or adding an addition, the attic must be properly insulate. Having proper insulation can help to make your home more comfortable and also save you money on heating and cooling costs. There are many ways to insulate the attic, but the best method is dependent on the needs of your home.

For example, if you reside in a cold climate, you may need to install higher R-values. You may also want to put a vapor barrier in the attic. A vapor barrier can assist in preventing mold and condensation. Additionally, certain attic floors are not suitable for insulation, so you will need to remove them prior to installing insulation.

The most effective method to insulation an attic is put insulation on the floor. Before doing this, you will need to remove any storage items or flooring made of plywood.

Check the roof

Conducting a expert roof examination is an important part of maintaining your home’s health. It will help you determine whether you require a new roof, or a repair or the combination of both. A professional roof inspection performed regularly will save you money over the long term.

The annual inspection of your roof can help you avoid unnecessary insurance claims. Some insurers require a detailed report on the condition of the roof and any repairs recommended.

When conducting a roof inspection a qualified professional will check for cracks, granule separations, missing shingles, and other problems. The inspector will also search for indications of water damage. This is especially important after a storm.

A structural inspection will examine the entire structure of your roof including the fascia, soffit and gutters. The inspector will also look for uneven planes and sliding.

Determine the amount of insulation needed

If you’re re-roofing your home or putting up a an entirely new roof, you need to determine what amount of insulation that you will require. While you could estimate the insulation you need by yourself but you may find it helpful to consult an expert. A professional can give you more precise estimates. They will also assist you to learn about the building codes and offer suggestions on how best to insulate your home.

The United States Department of Energy suggests different insulation R-values for various climate zones. You should also consider the number of cubic feet of insulation that will need. It is possible to locate an insulation calculator online. These are usually third-party calculators and only work when you have the specifics of the project.

The need for insulation must be balanced and ventilation

Having an attic that is properly ventilated and insulated is important for both convenience and financial reasons. Too little insulation can cause excess moisture which could damage your roof. Improper ventilation can also damage the roof’s sheathing leading to mold and mildew. These issues can lead to rot and costly repairs.

The most effective attic ventilation doesn’t use electricity, but makes use of thermal buoyancy and wind to transport air and heat through the attic. In summer, a home that is properly ventilated will be cooler than one that is not. In winter, excessive heat and moisture can cause ice dams to form that are damaging. The right ventilation will also extend the life the roof.

To reap the tiniest of benefits, it is recommended to select the most efficient form that will be suitable for the home you live in. There are a variety of choices to think about, such as blanket insulation, blown-in insulation, as well as batt insulation. Be cautious when mixing different types of insulation as it can introduce condensation risks.

Make sure to keep the 8 inches base flashing height

If you’re putting up a new roof or repairing leaks, you will need to ensure that the flashing’s base is at least 8 inches higher than the roof’s surface. This is crucial because it prevents water from pouring over the top of the flashings. There are two ways of ensuring that you maintain this height: adding insulation or changing the type of flashing.

In addition, adding an insulation layer to your roof will increase the level of the membrane surface and consequently the height of the base flashing. This is done by applying rigid insulation with an R-14 value. For example If the roof membrane is two inches above the shingles, then one inch of insulation board will need to be added. Alternatively, you can add insulation below the roof deck.

What Happens to My Solar Panels In The Reroof in Bellflower?

Recent Posts

Recent Posts

Request a
Free Quote

Our mission at SoCal Green Roofing & Builders is to be your go-to roofing contractor in the Los Angeles area. We provide services throughout the greater Los Angeles area, Orange, San Bernardino, and Ventura Counties.

CALL US NOW

Schedule Your Appointment

"*" indicates required fields

MM slash DD slash YYYY
This field is for validation purposes and should be left unchanged.