The clay roof tiles are beautiful and long-lasting option for Roofing. They are put in place using a process that is similar to the process used to install other roofing materials. The steps below will help you put up clay roofing tiles.
A new Roof Installation in Culver City can be hectic and critical. You’d need a professional in order to have a flawless new Roof Installation in Culver City! SoCal Green can provide you with your roof maintenance and installations.
1. The area to be prepared is where the tiles will be installed. This area should be free of any debris or vegetation. If you’re working on a sloped roof, be sure that the roof is well-level.
2. Install a layer of felt paper or synthetic material over the surface you’ve prepared. This will keep roofing materials safe from weather elements.
3. Begin installing the tiles starting at the bottom of the area, working your way up. Be sure that each tile is securely secured before moving on to the next one.
4. Continue to lay them until total area is completely fully covered.
5. Examine the tiles to ensure they’re secure. If you notice any tiles are loose, repair them.
6. Let the tiles dry for at least 24 hours prior to walking on them.
Attach the tiles to the battens
Once you’ve installed the battens, it’s time to fix the tiles to them. It is necessary to use screws or nails for this, depending on the kind of tile you’re using. Make sure that you drill the holes to accommodate screws or nails to avoid splitting the tile. Begin with the lowest row of tiles, and move upwards and overlapping each row as move up. When you reach the upper row, you may require cutting the tiles to fit. Make sure you use a tile cutter or nippers made for clay tiles to keep them from being damaged.
Align tiles using the appropriate tiles with the correct overlap
To make sure your tiles are in the right overlap Use an appropriate level to draw an outline on the middle of your course. This line must be aligned with the top of the tiles on the opposite side. Once your lines are level you can use the chalk line to create parallel to the beginning course. This line will help you make sure your tiles are in alignment as you set them up.
Cut tiles to fit with a tile cutter
The majority of clay roof tiles are cut with a tile cutter. You’ll need to make sure you have the right dimensions cutter that fits the type of tile. For smaller tiles, you can use a manual tile cutter. For larger tiles, you’ll need an electrical tile cutter.
First, draw a line on the tile you’d like to cut. After that, you can place the tile cutter onto the tile, and then score it along the marked line. Then you can snap the tile along the scored lines to split it.
Install half round tiles at corners
It is essential to attach half round tiles to the corners of the roof first. It will guarantee that water will flow away from the structure and will not swell at the edges. After the half-round tiles are installed, the rest of the roof can be tiled in the same manner.
Add mortar to secure tiles
Installing clay roof tiles is a bit more complicated than other types of roofing, but the results are well enough to warrant the time and effort. Tiles made of clay are long-lasting and are very durable which makes them a great choice for areas with extreme weather conditions.
One of the primary steps in installing clay roof tiles is to apply mortar to secure the tiles. Mortar is a form of cement used to bond the tiles to the roof. It is essential to choose an excellent quality mortar that is approved for outdoor use.
Apply sealant to tiles for additional waterproofing
After you’ve put in battens, you are able to then install the roof tiles made of clay. Start at the bottom and proceed to the top and apply sealant to the tiles to provide additional waterproofing. Make sure the tiles are placed evenly and that the sealant is applied correctly in order to prevent leaks.
Examine tiles for cracks or damage
When you install clay roofing tiles, be sure to inspect the tiles for any cracks or damage. Cracks can allow water to enter the tile , causing damages to roofs. Also, be sure to verify the tiles’ dimensions and fit prior to installation.
In the end, putting up clay roof tiles is not a difficult job, but it is essential to follow the instructions with care. Make sure to wear gloves and a mask for dust, and to work in a well-ventilated area. With a bit of caution and attention to the smallest of details, you’ll be able set up your clay roof tiles successfully.