Tiles for roofing made of clay are an attractive and long-lasting option for Roofing. They are installed with an installation process similar to the process used to install other roofing materials. The steps below will help you put up clay roofing tiles.
The process of a new Roof Installation in Lynwood can be difficult and demanding. You’ll need a professional order to get the perfect new Roof Installation in Lynwood! SoCal Green is here to provide you with your Roof Installation in Lynwoods and maintenance needs.
1. Make sure to prepare the area in which tiles will be placed. This area should be free of vegetation and debris. If you’re working on a sloped roof, ensure that the area is flat.
2. Install an overlay of felt paper or synthetic underlayment over the area you have prepared. This will help to shield the roofing materials from elements.
3. Begin installing the tiles on the bottom of the area, working your way up. Make sure every tile is secured prior to moving onto the next.
4. Continue to install your tiles till the entire area is complete.
5. Inspect the tiles and ensure they’re secure. If you notice any tiles are loose, re-secure them.
6. Let the tiles dry for at least 24 hours before taking a walk on them.
Attach the tiles to the battens
Once you’ve installed the battens, it is time to fix tile to the battens. It is necessary to use nails or screws to do this, based on the type of tile you are using. Make sure you drill the holes to accommodate nails or screws to prevent the tile from splitting. Start at the lower row of tiles and work your way up, overlapping each row as you proceed. When you reach the top row, you may have to cut the tiles to make them fit. Make sure to employ a tile cutter, or nippers designed specifically for clay tiles in order to prevent them from breaking.
Align tiles using the appropriate overhang
To make sure your tiles have the correct overlap Use an appropriate level to draw an area in the center of your course. This line must be aligned with the tiles’ tops on the opposite side. Once the lines are level use a chalk line to snap an angle perpendicular to the starting course. This line will assist you to make sure your tiles are in alignment as you set them up.
Cut tiles to fit with an a-z tile cutter
The majority of clay roofing tiles are cut to size using the help of a tile cutter. You’ll have to ensure that you have the correct dimensions cutter that fits the type of tile. For smaller tiles, you can use a manual tile cutter. To cut bigger tiles you’ll need an electrical tile cutter.
The first step is to mark the tile where you’d like to cut. Then, position the tile cutter on the tile and score it on the line you have marked. Then you can snap the tile on the score edge to cut it.
Install half round tiles to corners
It is important to install half-round tiles on the corners of the roof first. It will guarantee that water will be directed away from the building and will not swell within the corner. After the half-round tiles are installed then the remainder of the roof is able to be tiled in the same manner.
Apply mortar to cement tiles to ensure they are secure.
Installing clay roof tiles is a bit more complicated than other types of roofing, however the end result is enough to warrant the time and effort. Clay tiles are long-lasting and are very durable and therefore a good choice for areas with extreme weather conditions.
One of the most crucial steps in installing clay roofing tiles is adding mortar to hold the tiles in place. Mortar is a form of cement used to adhere tiles to roof. It is essential to choose a good quality mortar that is approved as suitable for use outdoors.
Apply sealant to tiles for extra waterproofing
After you’ve put in battens, you are able to then install the clay roof tiles. Start at the bottom , and work your way up and apply sealant to the tiles to provide additional waterproofing. Be sure that the tiles are placed evenly and that the sealant is properly applied in order to avoid any leaks.
Examine tiles for cracks or damage
When you install clay roofing tiles, be sure to inspect the tiles for fractures or damages. Cracks can allow water to enter the tile , causing damages to roofs. Also, be sure to examine the tiles for the proper fit and size before installation.
In the end, putting up clay roofing tiles isn’t an uncomplicated task, but it is important to follow the directions attentively. Make sure to wear gloves and a dust mask and be in a ventilated area. With a little care and attention to detail, you’ll be able put up your roof tiles made of clay efficiently.
