SoCal Green Roofing Of Los Angeles
License# 1057764
Serving in Los Angeles & Surrounding Areas
License# 1057764

How Do I Install Flashing On Existing Roof In Manhattan Beach?

If you’re considering installing flashing on an existing roof there are some factors you’ll have to consider. First, you’ll need to make sure that the roof is in good shape and there aren’t any leaks. Once you’ve established that the roof is in good condition then you’ll have to determine the area you’ll install the flashing. After you’ve measured your space, you’ll need cut the flashing to fit and then install it using nails or screws.

The process of a new Roof Installation in Manhattan Beach can be stressful and challenging. You’ll need a professional order to get a perfect new Roof Installation in Manhattan Beach! SoCal Green is here to help you with roof maintenance and installations.

Take a look at the area to be illuminated

Measurement of the area that will be flashed is an important first step in the process of installing flashing on an existing roof. It is important to know the dimensions of the area to be flashed in order that you can buy the correct amount of flashing materials. Also taking measurements of the size of the area will provide you with an understanding of the roof structure and how the flashing will be placed.

Cut flashing to size

Start in cutting off the flashing to size. If you’re using a pan that’s already formed it’s just necessary to cut it long enough to extend 6 inches past the edge of the roof. For roll roofs you’ll need to cut it twice the length of the width of the roof. Then cut the flashing horizontally in half to create two pieces with the same length as the length of the roof.

Remove any old shingles and nails

To install flashing on an existing roof first you’ll need to take off any old shingles and nails. Once that’s done then you can put in your new flashing. Be sure to cover the new flashing by at least 2 inches and use corrosion-resistant nails and screws to secure it in place.

Secure flashing onto the roof

If your home has an roofing system that is in place, you’ll need to take special care in putting up flashing. The first step is to remove any shingles or other materials that may be blocking the path. When the roof is clean it’s time be able to cut and measure the flashing to suit. Make sure you leave plenty of an overlap so that the flashing can be securely fixed on the roof. Once the flashing has been put in place, you can install the new shingles or other types of roofing material.

Nail flashing in place

1. Make sure the surface is clean and free of any debris.

2. Find the area that needs to be covered, then cut the flashing to size.

3. Apply a large amount of adhesive to the reverse of the flashing.

4. Press the flashing into place and hold it there for a few minutes in order to let the adhesive be set.

5. Attach the flashing with roofing nails.

6. Apply a thin layer of sealant along the edges of the flashing to secure it in place.

Cover the seams using roofing cement

After you have cut the flashing strips to size, lay them out on the roof so that they are overlapping the joint in the roofing material by minimum 2 inches. Once the flashing is set, apply a continuous bead of roofing cement on the surface of the overlap. Utilize a putty blade for smoothing the cement, and then take off any excess.

Apply caulk all over the flashing

For installing roofing flashing you’ll need to apply caulk to the flashing. Begin by removing any old caulk and other debris from the area. Then, apply a large amount of caulk to the side of the flashing that is below it. Make sure you smooth it out until it’s even and level. Then, press the flashing into position and seal it with more caulk.

Install additional shingles if necessary.

If you are installing flashing on your old roof structure, it might require the installation of additional shingles to create an even surface for the flashing to stick to. Begin by removing any damaged or missing shingles. Then, apply the new shingles into the appropriate spot. Make sure you overlap the shingles in order that the flashing will be completely protected.

If you’re thinking about installing flashing on your current roof There are a few things to be aware of. First, ensure that you’re using the correct equipment and materials. Also, be patient and be careful not to cause damage to your roof. Thirdly, if you’re unsure of which direction to take it’s best to employ an expert. With just a little planning and attention it is possible to install flashing to your roof and keep your home in great shape for long time to be.

Can A New Roof be Put in place during winter in Manhattan Beach?

Recent Posts

Recent Posts

Request a
Free Quote

Our mission at SoCal Green Roofing & Builders is to be your go-to roofing contractor in the Los Angeles area. We provide services throughout the greater Los Angeles area, Orange, San Bernardino, and Ventura Counties.


Schedule Your Appointment

"*" indicates required fields

MM slash DD slash YYYY
This field is for validation purposes and should be left unchanged.