SoCal Green Roofing Of Los Angeles
License# 1057764
Serving in Los Angeles & Surrounding Areas
License# 1057764

How Do I Install Hurricane Straps On Existing Roof In Del Aire?

The installation of hurricane straps is a relatively easy process that can be completed in a few hours. It is the first thing to pinpoint the location of the rafters in your roof. After the rafters are located then the second step will be to cut and measure the hurricane straps into the appropriate length. Once the straps are cut and trimmed, the next step is to screw or nail the straps into the rafters. After the hurricane straps are installed, it is time to put in the hurricane clips. The hurricane clips must be placed at the bottom of the rafters and at the highest point of the rafters. The final step is to put in the roofing screws or nails.

A new Roof Installation in Del Aire can be hectic and critical. You’d need a professional in order to get the perfect new Roof Installation in Del Aire! SoCal Green will assist you with your roof maintenance and installations.

1. Examine the roof to determine the number and placement on the straps for hurricanes.

2. Get the needed amount of hurricane straps.

3. Install the hurricane straps to the existing roof, following the instructions of the manufacturer.

4. Inspect the roof regularly to ensure you have hurricane-resistant straps in shape and operating correctly.

Cut the straps to size.

For installing hurricane straps on the roof of your home, you’ll need take measurements and then cut them according to the size. After you’ve got the straps cut to the right size, you’ll have to connect they to the roofing. For this, make holes in the roof, and then screw the straps into place. Once the straps are in place, you’ll need attach them to hurricane clips. The hurricane clips require to be fixed to the wall.

Drill holes in the straps in order to match the existing rafters.

If your house was constructed before Hurricane Andrew of 1992 it may not have the proper hurricane straps. It’s the reason it’s so important to put them in yourself to ensure your home is prepared for the next storm to hit. Here’s how:

1. Measure the width that your rafters are. The straps should be long enough to cover at least two rafters.

2. Drill holes in the straps to make them match with the rafters that are already in place.

3. Attach the straps to rafters by using nails or screws.

4. Repeat the procedure for all the rafters on your roof.

If you take the time to install hurricane straps, you’ll have peace of mind that your home is ready for the next major storm.

Apply a generous amount of construction adhesive on the straps’ back.

Applying a large amount of construction adhesive to the straps’ back is a key step in ensuring that they stay in place during a storm. Make sure to apply the adhesive evenly and on all four straps. Once the adhesive has been put on, you can apply the straps with a firm press into position onto the roofing.

Connect the straps to the existing rafters.

Straps for hurricanes are an essential component of making your home hurricane-proof. They ensure that your roof stays attached to the walls during high winds, and prevent it from being destroyed by the wind.

If your home doesn’t have hurricane straps, it is possible to install them yourself. Begin by identifying the existing rafters in your roof. Then, attach your straps onto the roof rafters using screws or nails. Make sure the straps are secured so they can withstand high winds.

Secure the straps with the galvanized screw or nail.

After you have installed those hurricane straps you must to attach them to your roof. The first step is to ensure that they are secured, so make use of galvanized screws or nails to ensure a tight fit. It is recommended to put the straps approximately two feet apart, at the minimum, and make sure they’re properly secured with rafters or the trusses. If you’re unsure of how to do this, consult a professional contractor.

Seal the straps with the caulk and sealant.

If you’re installing hurricane straps on an existing roof, it is necessary to secure the straps using caulk or sealant. This will ensure that the straps are secure and won’t come loose in high winds.

Inspect the installation to make sure the straps are properly secured.

If you are installing hurricane straps onto the roof of an already existing structure, make sure to inspect the structure to ensure that the straps are properly secured. In the majority of cases, the straps should be put in place near the point at which the rafters or trusses meet the top plate of the wall. The straps must be long enough to extend past the ends of the rafters or trusses and must be installed using nails or screws that are at least 3 inches in length.

In conclusion the hurricane straps are a crucial component of protecting your home from hurricane damage. Installing them is relatively simple and can be done within a couple of hours. If you reside in an area prone to hurricanes, make sure you take the time to set up hurricane straps onto your existing roof.

Is it OK To Perform the Roof Installation in Del Aire In Rain?
Which Is Cheaper To Install Metal Instead of Shinge Roof in Del Aire?

Recent Posts

Recent Posts

Request a
Free Quote

Our mission at SoCal Green Roofing & Builders is to be your go-to roofing contractor in the Los Angeles area. We provide services throughout the greater Los Angeles area, Orange, San Bernardino, and Ventura Counties.

CALL US NOW

Schedule Your Appointment

"*" indicates required fields

MM slash DD slash YYYY
This field is for validation purposes and should be left unchanged.