SoCal Green Roofing Of Los Angeles
License# 1057764
Serving in Los Angeles & Surrounding Areas
License# 1057764

How Do I Install Hurricane Straps On Your Existing Roof In Beverly Hills?

The installation of hurricane straps is a fairly simple process that can be completed in a few hours. First, identify the location of the rafters in your roof. Once the rafters are found then the following step involves measuring and cutting the hurricane straps to the proper length. After the straps have been cut and trimmed, following is the process to nail or screw the straps into the rafters. After the hurricane straps have been put in place, the next step is to install the clips for hurricanes. The hurricane clips should be installed at the bottom of the rafters and at the top of the rafters. The last step is to attach the roofing nails or screws.

The process of a new Roof Installation in Beverly Hills can be difficult and demanding. You’ll need a professional order to have a flawless new Roof Installation in Beverly Hills! SoCal Green can provide you with your roofing maintenance and installation needs.

1. Examine the roof to determine the location and number on the straps for hurricanes.

2. Purchase the necessary quantity of straps for hurricanes.

3. Set up the storm straps onto the existing roof, following the manufacturer’s instructions.

4. Check the roof on a regular basis to make sure you have hurricane-resistant straps in working order and functioning correctly.

Measure and cut the straps to size.

To install hurricane straps on the roof of your home, you’ll have be able to cut and measure the straps to size. Once the straps are cut to the right size, you’ll have to secure they to the roofing. To do this, you’ll need make holes in the roof before screwing the straps onto the roof. After the straps are set, you’ll have attach them to hurricane clips. The hurricane clips will then have to be connected to the wall.

Pre-drill holes in the straps to make them match with the existing rafters.

If your house was constructed before Hurricane Andrew which hit in 1992 chances are it doesn’t have the proper hurricane straps. That’s why it’s important to install them yourself to make sure your home is ready for the next storm to hit. Here’s how:

1. Take a measurement of the dimensions that your rafters are. The straps should be long enough to span at minimum two rafters.

2. Pre-drill holes in the straps to match the rafters already in place.

3. Connect the straps to the rafters using screws or nails.

4. Repeat the process for the other the rafters on your roof.

If you take the time to install hurricane straps, you’ll be able to rest easy knowing that your home is ready for the next major storm.

Use a good amount of construction glue to the back of the straps.

Applying a generous amount of construction glue to the back of the straps is an essential step to ensuring that they stay in place during a storm. Make sure you spread the glue evenly and on all four straps. After the adhesive has been applied, put the straps in a secure place onto the roofing.

Attach the straps to existing rafters.

The hurricane straps are an essential part of hurricane-proofing your home. They will keep your roof attached to your walls in high winds, and prevent it from being removed.

If your home isn’t equipped with hurricane straps, you could install them yourself. Begin by identifying the rafters that are currently on your roof. Then, attach them to the rafters using nails or screws. Be sure that the straps are securely fastened so they can withstand high winds.

Make sure the straps are secured with the galvanized screw or nail.

When you’ve got those hurricane straps you must to attach them to the roof. It is crucial to ensure that they are secure. Use Galvanized nails or screws to make sure you have a secure fit. You’ll want to place the straps at least two feet apart at the minimum. Also, make sure they’re securely attached to the trusses or rafters. If you’re not sure how to do this, consult an expert contractor.

Seal the straps with caulk or sealant.

If you’re installing hurricane straps on an existing roof, it is necessary to secure the straps using sealing caulk, or sealant. This will make sure that the straps remain safe and won’t fall off during high winds.

Examine the installation to be sure that the straps are secured.

When installing hurricane straps on any roof that is already in place, make sure to examine the installation to ensure the straps are properly secured. In the majority of cases the straps need to be put in place in the area where the rafters or trusses meet the wall’s top plate. The straps should be long enough to extend over the end of the rafters or trusses and must be installed using nails or screws that are at least 3 inches long.

In the end they are a crucial element to protect your home from hurricane damage. They are relatively easy to install and can be accomplished within a couple of hours. If you reside in an area that is susceptible to hurricanes, make sure to take the time to set up hurricane straps onto your existing roof.

How To install a Tin Roof in Beverly Hills?
How do you install roll roofing in Beverly Hills?

Recent Posts

Recent Posts

Request a
Free Quote

Our mission at SoCal Green Roofing & Builders is to be your go-to roofing contractor in the Los Angeles area. We provide services throughout the greater Los Angeles area, Orange, San Bernardino, and Ventura Counties.


Schedule Your Appointment

"*" indicates required fields

MM slash DD slash YYYY
This field is for validation purposes and should be left unchanged.