SoCal Green Roofing Of Los Angeles
License# 1057764
Serving in Los Angeles & Surrounding Areas
License# 1057764

How Do I Install Roll Roofing In Alondra Park?

If you’re considering installing roll roofing, you’re in the right spot. In this blog post we’ll walk you through how to properly install roll roofing so that you’ll enjoy an unbroken roof for many years to come. We’ll go over everything from measuring and cutting the roofing to installing the sealant and flashing. So whether you’re a roofing expert or a DIYer, this blog article will be able to help you.

An new Roof Installation in Alondra Park can be hectic and critical. You’d need a professional in order to get a perfect new Roof Installation in Alondra Park! SoCal Green will help you with Roof Installation in Alondra Parks and maintenance needs.

Measure the roof area

The roof’s size is used to determine how much roll roofing you’ll require. To determine this multiply the width and length of the roof in feet to get your square footage. Add your square footage for chimneys, dormers or any other protrusions. Then, multiply this figure by 1.1 to take into account waste. For instance, if your roof is 100 square feet with two dormers, you’ll require 121 square feet of roofing.

Get the supplies you need

Buy the required materials. This includes the roll roofing and any screws, nails, sealant or other components necessary for the installation. Make sure to buy enough material to completely cover the roof, with a bit more in the event of a mistake or damages.

Remove existing roofing material

It is the next thing to do: take off any roofing materials that are in use including tiles or shingles. This can be done with a pry bar or a utility knife. Be sure to wear protective glasses and gloves to shield yourself from sharp edges. If you are working with asphalt shingles, then you’ll have to also remove the felt paper or tar paper beneath.

Install an underlayment

If you’re planning to install roll roofing, it’s important to lay down an underlayment before you start. The underlayment adds an extra layer of protection to your roof, and can help to prolong the life of the roofing material. There are several kinds of underlayment that are available, so be sure to pick one that’s suitable to your climate and roofing material.

Determine the length of the roll roofing

To determine how long roll roofing that you need, measure the length and width of the roof space you want to cover. Then, add each roofing’s sides. Once you have that number, you can divide it by the length of the roll roofing material you’ll use. This will provide you with the number of rolls that you will need to purchase.

Begin installation of roll roofing

Installing roll roofing is a relatively simple and straightforward process. But there are a few points to remember to make sure that the installation is successful.

Before you start, ensure that the surface you’re putting the roofing is free of any debris. Any dirt or debris that gets on the surface can hinder the roof’s ability to be able to adhere properly.

The next step is to take measurements of the area you’ll be installing your roofing over. This will help ensure that there is enough roof material that covers the whole surface.

Once you have the materials in place and the surface prepared, you can begin laying down the roll roofing. Begin at the end of the surface and unroll it as you move along. Make sure to overlap both edges on each roofing piece by approximately 2 inches.

Install the roofing using roofing nails at intervals of 6-8 inches. Then, trim any roofing material that is not completely covered around the edges.

The roll roofing can be secured by nails

When installing roll roofing be sure to secure the roofing with nails. This will ensure that the roofing stays in place and will not come loose. It is important to use the correct dimensions and types of nails when securing the roof. It is important to speak with an expert roofer to ensure that you are using the correct nails.

Apply sealant to ensure proper installation

When you have your roofing material cut to the size you want and nailed into place It is crucial to seal the edges. This will ensure the roofing is correctly installed and won’t come off over time. You can find sealants at a majority of hardware stores.

In the end the installation of roll roofing is a relatively easy process that can be completed within a couple of hours. It is crucial to ensure that the surface is clean and smooth before beginning the process, and to ensure that the roll roofing is properly secured in order to create an ongoing and durable seal.

Should I Install My Own Roof in Alondra Park?

Recent Posts

Recent Posts

Request a
Free Quote

Our mission at SoCal Green Roofing & Builders is to be your go-to roofing contractor in the Los Angeles area. We provide services throughout the greater Los Angeles area, Orange, San Bernardino, and Ventura Counties.


Schedule Your Appointment

"*" indicates required fields

MM slash DD slash YYYY
This field is for validation purposes and should be left unchanged.