SoCal Green Roofing Of Los Angeles
License# 1057764
Serving in Los Angeles & Surrounding Areas
License# 1057764

How Do I Install Roll Roofing In Huntington Park?

If you’re planning to install roll roofing, you’re at the right spot. In this blog we’ll teach you how to properly install roll roofing so that you’ll have an unbroken roof for many the years to be. We’ll cover everything from measuring and cutting the roofing to installing the flashing and sealing. Also, whether you’re a roofing professional or a DIYer this blog article will cover everything you need to know.

The process of a new Roof Installation in Huntington Park can be difficult and demanding. You’ll need a professional order to get a perfect new Roof Installation in Huntington Park! SoCal Green can provide you with your roof maintenance and installations.

Take a look at the roof area.

Measure the roof area to determine how much roll roofing you’ll require. To determine this multiply the width and length of the roofing in inches to get your square footage. Add the square footage of dormers, chimneys, or any other protrusions. Then, multiply this figure by 1.1 to account for the waste. So, if your roof is 100 square feet with two dormers, you’ll need 121 square feet of roofing.

Purchase the necessary supplies

Purchase the necessary items. It includes roll roofing itself, as well as any screws, nails sealant, nails or other items required for installation. Be sure to purchase enough to complete the roof plus a little extra in case of mistakes or damage.

Take off roofing material that is currently in use

Next, you must remove any existing roofing material like tiles or shingles. This can be accomplished with an apex or utility knife. Make sure you wear the appropriate safety gloves as well as gloves in order to shield your self from cutting edges. If you are working with asphalt shingles, you’ll also need to remove the felt paper or tar paper underneath.

Install an underlayment

If you’re planning to install roll roofing, you need to put in an underlayment prior to you start. An underlayment provides an additional layer of protection for your roof and can help to prolong the lifespan of the roofing material. There are many types of underlayment to choose from and you should select one that is suitable for the climate you live in and your roofing material.

Determine the length of roll roofing

To calculate the roll roof’s length you will need, measure the width and length of the roof space you’d like to protect. Add to the total length roofing’s sides. Once you have this number, divide it by the length of the roll roofing material you will be using. This will give you the amount of rolls you are required to buy.

Start laying roll roofing

Roll roofing installation is a relatively simple and straightforward procedure. However, there are a few things you need to remember to ensure that your roll roofing installation goes smoothly.

Before you start, ensure that the area you’re installing the roofing is clean and free of any debris. Any dirt or debris on the surface will hinder the roof’s ability to stick properly.

Next, you’ll need to determine the area you’ll be installing the roofing on. This will help ensure that you have enough roofing material to cover the entire area.

Once you have the materials and the surface is completed, you are able to start laying the roofing roll. Begin by putting the roofing on one side of the surface and unroll it as you go. Make sure to overlap the edges of each piece of roofing by 2 inches.

Install the roofing using roofing nails at intervals of 6-8 inches. Lastly, trim any roofing material left over around the edges.

Make sure the roofing is secured with nails

When installing roll roofing make sure you anchor the roofing with nails. This will make sure that the roofing stays in place and doesn’t come loose. It is crucial to choose the right dimensions and types of nails when securing the roofing. Make sure you consult an expert roofer to ensure that you’re using appropriate nails.

Apply sealant to ensure proper installation

After you have the roofing material cut to size and then nailed in place it is essential to seal the edges. This will ensure that the roofing is properly installed and won’t loosen as time passes. Sealants are available at most hardware stores.

In the end the installation of roll roofing is a easy process which can be accomplished in a few hours. It is crucial to ensure that the surface is smooth and clean before starting, and it is essential that roll roofing material has been properly secured for an ongoing and durable seal.

What is the best way To Set Up Metal Roofing in Huntington Park?

Recent Posts

Recent Posts

Request a
Free Quote

Our mission at SoCal Green Roofing & Builders is to be your go-to roofing contractor in the Los Angeles area. We provide services throughout the greater Los Angeles area, Orange, San Bernardino, and Ventura Counties.


Schedule Your Appointment

"*" indicates required fields

MM slash DD slash YYYY
This field is for validation purposes and should be left unchanged.