Tiles for roofing made of clay are beautiful and long-lasting choice for roofing. They are installed with an installation process similar to the installation of other roofing materials. The next steps will help you put up clay roofing tiles.
An new Roof Installation in Dominguez can be stressful and challenging. You’ll need a professional order to have a flawless new Roof Installation in Dominguez! SoCal Green can provide you with your roofing maintenance and installation needs.
1. Make sure to prepare the area in which the tiles will be installed. The area must be clear of debris and vegetation. If you’re working on a pitched roof, ensure that the area is flat.
2. Install an overlay of felt paper or synthetic underlayment over the surface you’ve prepared. This will help to shield the roofing materials from weather elements.
3. Start putting the tiles in on the bottom of the prepared space, and work your way upwards. Make sure every tile is secured prior to moving onto the next.
4. Continue to lay the tiles until the total area is completely complete.
5. Inspect the tiles to ensure they’re secure. If any tiles are loose, repair them.
6. Allow the tiles to cure for at least 24 hours before taking a walk on them.
Fix the tiles to battens
Once you’ve installed the battens, it is time to attach your tiles. It is necessary to use screws or nails for this, based on the kind of tile you’re using. Make sure that you drill the holes for the screws or nails to prevent the tile from splitting. Begin at the bottom row of tiles and move upwards, overlapping each row while you go. Once you have reached the upper row, you may require cutting the tiles in order to fit. Make sure to use a tile cutter or nippers made for clay tiles so as to avoid damaging them.
Align tiles to the proper tiles with the correct overlap
To ensure your tiles are in the right overlap make use of the level to mark an area in the center of your starting course. The line should be in line with the tiles’ tops on either side. When your line has been leveled, use a chalk line to snap an angle perpendicular to the starting course. This line will allow you to ensure that your tiles are aligned when you put them in place.
Cut tiles into the shape you want with the help of a tile cutter
Most clay roofing tiles are cut to size using the help of a tile cutter. You’ll have to ensure you have the appropriate dimension cutter to fit the size of tile that you’re working with. For smaller tiles, you can use a manual tile cutter. To cut bigger tiles you’ll need an electric tile cutter.
First, draw a line on the tile you’d like to cut. Then, position the tile cutter on the tile and mark it in the direction of the mark. Then you can snap the tile along the scored edge to cut it.
Install half round tiles to corners
It is essential to attach half-round tiles onto the roof’s corners first. The corners will be protected and the water is directed away from the structure and will not collect within the corner. After the half round tiles are in place then the remainder of the roof is able to be tiled in the same manner.
Apply mortar to cement tiles to ensure they are secure.
Installing clay roofing tiles is a bit more difficult than installing other kinds of roofing, however the end result is enough to warrant the time and effort. Tiles made of clay have a long lifespan and are extremely durable and therefore a good choice for areas with severe weather conditions.
One of the most crucial steps in installing clay roof tiles is adding mortar to fix the tiles. Mortar is a form of cement used to adhere tiles to roof. It is important to use an excellent quality mortar that is rated for outdoor use.
Apply sealant on tiles to provide waterproofing
After you have installed battens, you are able to put in the clay roof tiles. Begin at the bottom and work your way up, applying sealant to the tiles for extra waterproofing. Make sure the tiles are equally spaced and the sealant is properly applied in order to avoid any leaks.
Inspect tiles for any cracks or damage
When you install clay roofing tiles Be sure to check the tiles for any damages or cracks. Cracks can allow water to seep into the tiles and cause damage to the roof. Be sure to examine the tiles for the proper dimensions and fit before installing them.
In conclusion, installing clay roof tiles is not a difficult job, but it is crucial to follow the instructions attentively. Wear gloves and a dust mask, and work in a well-ventilated space. With a bit of caution and attention to detail you will be able to put up your roof tiles made of clay efficiently.