SoCal Green Roofing Of Los Angeles
License# 1057764
Serving in Los Angeles & Surrounding Areas
License# 1057764

How Install Roll Roofing In Valinda?

If you’re planning to install roll roofing, you’ve come to the right spot. In this blog post we’ll teach you how to install roll roofing so that you’ll have an unbroken roof for many the years to come. We’ll go over everything from cutting and measuring the roofing to installing the sealant and flashing. Also, whether you’re a roofing professional or a DIYer this blog post will have you covered.

A new Roof Installation in Valinda can be hectic and critical. You’ll need a professional order to get the perfect new Roof Installation in Valinda! SoCal Green will help you with roof maintenance and installations.

Measure the roof area

Take a look at the roof’s area to determine the amount of roll roofing you’ll require. To do this multiply the width and length of the roofing in inches, to determine the square footage. Add to the total square footage chimneys, dormers, or other protrusions. Finally, multiply this number by 1.1 to account for waste. For instance, if your roof measures 100 square feet and has two dormers, you’ll need the equivalent of 121 square feet in roofing.

Get the supplies you need

Purchase the necessary items. It includes roll roofing itself, as well as any nails, screws, sealant, or other materials needed for installation. Make sure to buy enough to complete the roof with a bit more in the event of a mistake or damage.

Remove any roofing material currently on the roof

The next step is to take off any roofing material that is in place, such as shingles or tiles. This can be accomplished with an apex or utility knife. Be sure to wear the appropriate safety gloves as well as gloves in order to shield yourself from sharp edges. If you’re working with asphalt shingles, you’ll also need to remove the felt or tar paper beneath.

Install an underlayment

If you’re installing roll roofing, it is essential to put in an underlayment prior to you begin. Underlayments provide an additional layer of protection to your roof, and it will help prolong the lifespan of the roofing material. There are several types of underlayment to choose from and you should choose one that’s appropriate to your climate and roofing material.

Determine the length of roll roofing

To calculate the length of roll roofing that you require, take measurements of the length and width of the roof area you’d like to be covering. Add to the total length of the roof’s edges. Once you have this number, you can divide it by the length of the roll roofing material you will be using. This will provide you with the number of rolls that you will need to purchase.

Begin installation of roll roofing

Roll roofing installation is fairly simple and easy procedure. But there are some aspects you should keep in mind to ensure a successful installation.

The first step is to ensure the surface you’re putting the roofing on is clean and free of debris. Any dirt or other debris that is on the surface will make it difficult for the roofing to adhere to the surface.

Next, you’ll need to take measurements of the area you’ll be installing the roofing on. This will ensure you have enough roofing material to cover the entire surface.

After you have your items and the surfaces are prepared, you can begin installing the roll roofing. Begin at the end of the surface and unroll the roofing as you proceed. Be sure to cover the edges of each roofing piece by 2 inches.

Install the roofing using roofing nails at intervals of 6-8 inches. Then, trim any excess roofing material around the edges.

Secure the roll roofing with nails

When installing roll roofing, ensure that you anchor the roofing with nails. This will ensure that the roofing stays in place and doesn’t come loose. It is important to use the correct size and type of nails to secure the roof. Be sure to consult with a professional roofer to ensure that you are using the correct nails.

Apply sealant to ensure correct installation

After you have the roofing material cut to size and nailed into place it is essential to seal the edges. This will ensure that the roofing is installed correctly and won’t come off as time passes. You can purchase sealants in a variety of hardware stores.

In conclusion the installation of roll roofing is a fairly simple task which can be accomplished within a couple of hours. However, it is important to ensure your surface is smooth and clean before beginning the process, and to ensure that the roll roofing is properly secured for an effective and long-lasting seal.

How Do I Install Hurricane Straps On Existing Roof in Valinda?

Recent Posts

Recent Posts

Request a
Free Quote

Our mission at SoCal Green Roofing & Builders is to be your go-to roofing contractor in the Los Angeles area. We provide services throughout the greater Los Angeles area, Orange, San Bernardino, and Ventura Counties.


Schedule Your Appointment

"*" indicates required fields

MM slash DD slash YYYY
This field is for validation purposes and should be left unchanged.