Clay roof tiles are beautiful and long-lasting choice for roofing. They are installed using an installation process similar to the installation of other roofing materials. The steps below will guide you through the steps to put up clay roofing tiles.
An new Roof Installation in East Whittier can be hectic and critical. It is essential to hire a professional in order to get a perfect new Roof Installation in East Whittier! SoCal Green is here to assist you with your roofing maintenance and installation needs.
1. The area to be prepared is where the tiles will be put in. This space should be free of any debris or vegetation. If you’re working with a pitched roof, make sure your roof is flat.
2. Place a layer of felt paper or synthetic underlayment over the prepared area. This will help protect the roofing materials from the elements.
3. Start installing the tiles starting at the bottom of the area, working your way upwards. Be sure that each tile is properly secured before moving on to the next tile.
4. Continue to install your tiles till the whole area is fully covered.
5. Examine the tiles and make sure they’re all secure. If you notice any tiles are loose, secure them again.
6. Allow the tiles to cure for at least 24 hours before taking a walk on them.
Attach the tiles to the battens
After you have installed the battens, it’s time to secure tile to the battens. It is necessary to use nails or screws to do this, based on the type of tile you’re using. Be sure to predrill the holes to accommodate screws or nails in order to prevent the tile from splitting. Start at the bottom row of tiles and work your way up by overlapping each row while you move up. Once you have reached the upper row, you may require cutting the tiles to make them fit. Make sure you make use of a tile cutter or nippers made specifically for clay tiles in order to avoid damaging them.
Align tiles to the proper tiles with the correct overlap
To make sure that your tiles are in the right overlap, use the level to mark a line on the center of your course. This line should be level with the tiles’ tops on either side. Once your line has been leveled, you can use a chalk line to snap an angle perpendicular to the beginning course. This line will assist you to align your tiles as you install them.
Cut tiles to fit with a tile cutter
Most clay roofing tiles are cut to size using an appropriate tile cutter. You’ll have to ensure you have the right dimension cutter to fit the size of tile that you’re working with. For smaller tiles, you can use a manual tile cutter. To cut bigger tiles you’ll need an electrical tile cutter.
First, draw a line on the tile you’d like to cut. Then, position the tile cutter onto the tile, and then score it in the direction of the mark. Then you can snap the tile along the scored edge to cut it.
Install half round tiles at corners
It is essential to attach half-round tiles on the roof’s corners first. It will guarantee that water will be directed away from the building and will not swell at the edges. After the half-round tiles are in place, the rest of the roof can be tiled the same way.
Add mortar to secure tiles
Installing clay roof tiles is more complicated than other kinds of roofing, but the result is worth the effort. Tiles made of clay are long-lasting and are extremely durable which makes them a great option for those who live in areas that have severe weather conditions.
One of the primary steps in installing clay roof tiles is to add mortar to hold the tiles in place. Mortar is a type of cement used to adhere tiles to roof. It is essential to choose an excellent quality mortar that is approved to be used outdoors.
Apply sealant on tiles to provide waterproofing
Once you’ve installed battens, you are able to put in the roof tiles made of clay. Begin at the bottom and move up the ladder, applying sealant to the tiles to provide additional waterproofing. Make sure that the tiles are equally spaced and the sealant is properly applied to avoid any leaks.
Inspect tiles for any cracks or damage
When installing clay roof tiles, be sure to inspect the tiles for damages or cracks. Cracks may allow water to enter the tile and cause destruction to your roof. Also, be sure to examine the tiles for the proper dimensions and fit before installing them.
In the end, putting up clay roofing tiles isn’t an easy task, however it is crucial to follow the instructions carefully. Be sure to wear gloves and a mask for dust, and to work in a well-ventilated area. With a bit of caution and attention to detail you’ll be able install your clay roof tiles efficiently.
Should I Install Attic Vents or a Roof Turbine in East Whittier?
How to Install Hurricane Straps on your existing Roof in East Whittier?
