SoCal Green Roofing Of Los Angeles
License# 1057764
Serving in Los Angeles & Surrounding Areas
License# 1057764

How To Install Hurricane Straps On Your Existing Roof In East Pasadena?

Installing hurricane straps is a relatively simple procedure that can be completed in a few hours. The first step is to identify the location of the rafters in your roof. Once the rafters have been located, the next step is to measure and cut the hurricane straps to the appropriate length. After the straps have been cut then following is the process to screw or nail the straps to the rafters. Once the hurricane straps have been put in place, following step installing these hurricane clips. The hurricane clips must be placed at the bottom of the rafters and on highest point of the rafters. The last step is to put in the roofing screws or nails.

An new Roof Installation in East Pasadena can be stressful and challenging. You’d need a professional in order to get the perfect new Roof Installation in East Pasadena! SoCal Green is here to help you with roofing maintenance and installation needs.

1. Check the roof for the number and placement on the straps for hurricanes.

2. Buy the required amount of straps for hurricanes.

3. Set up the storm straps on the existing roof, following the instructions of the manufacturer.

4. Inspect the roof regularly to make sure you have hurricane-resistant straps in condition and working effectively.

Cut the straps according to size.

In order to install hurricane straps onto the roof of your home, you’ll have to measure and cut the straps to the proper size. Once you have the straps cut to the right size, you’ll have to connect these straps to your roof. For this, you’ll need to drill holes in the roof and then screw the straps in place. Once the straps are set, you’ll have to attach them to the hurricane clips. The hurricane clips will then require to be fixed on the walls.

Make holes for the straps to match the rafters that are already in place.

If your home was constructed prior to Hurricane Andrew which hit in 1992 chances are it doesn’t have the proper hurricane straps. It’s the reason it’s so important to put them in yourself to make sure your home is ready for the next major storm. Here’s how:

1. Take a measurement of the width of your rafters. The straps should be long enough to span at least two rafters.

2. Drill holes in the straps in order to match the rafters that are already in place.

3. Attach the straps to the rafters by using nails or screws.

4. Repeat the process for all the rafters on your roof.

When you decide to install hurricane straps, you’ll have peace of mind knowing that your home is prepared for the next big storm.

Apply a generous amount of construction adhesive to the back of the straps.

Applying a generous amount of construction glue to the back of the straps is the most important step in making sure they remain in place during a hurricane. Make sure to use the adhesive in a uniform manner and on each of the four straps. After the adhesive has been applied, apply the straps with a firm press into their place over the top.

Attach the straps to the existing rafters.

The hurricane straps are an essential element of securing your home from hurricanes. They will keep your roof firmly attached to the walls during high winds, keeping it from being blown away.

If your home isn’t equipped with hurricane straps, it is possible to put them in yourself. Begin by identifying the rafters that are currently on your roof. Then, attach the straps to the rafters by using screws or nails. Be sure that the straps are fastened securely so that they can withstand the force of high winds.

Attach the straps using galvanized screws or nails.

Once you have the hurricane ropes you must to secure them to the roof. The most important thing is to ensure they’re secure. Use galvanized screws or nails to ensure a snug fit. It is recommended to put the straps at least 2 feet apart at a minimum. Also, make sure they’re properly secured to the trusses or rafters. If you’re unsure of how to do this, consult an experienced contractor.

Secure the straps using sealing caulk, or sealant.

If you’re installing hurricane straps to an already existing roofing structure, you’ll have to seal them with the caulk and sealant. This will ensure that the straps are safe and won’t fall off in strong winds.

Check the installation to make sure that the straps are correctly secured.

When installing hurricane straps on an existing roof, make certain to check the structure to ensure that the straps are secured properly. In the majority of cases the straps must be put in place near the point at which the rafters or trusses meet the top plate of the wall. The straps should be long enough to extend past the ends of the trusses or rafters, and they should be secured with nails or screws that are at least 3 inches long.

In conclusion the hurricane straps are an important element to protect your home from the effects of hurricanes. They are relatively easy to install and can be accomplished within a couple of hours. If you live in an area that is prone to hurricanes, make sure that you have the time to install hurricane straps onto your existing roof.

Will Homeowner Insurance Cover Improperly Installed Roofing in East Pasadena?
What is the best way to Set Up Metal Roofing in East Pasadena?

Recent Posts

Recent Posts

Request a
Free Quote

Our mission at SoCal Green Roofing & Builders is to be your go-to roofing contractor in the Los Angeles area. We provide services throughout the greater Los Angeles area, Orange, San Bernardino, and Ventura Counties.

CALL US NOW

Schedule Your Appointment

"*" indicates required fields

MM slash DD slash YYYY
This field is for validation purposes and should be left unchanged.