Tiles for roofing made of clay are an attractive and long-lasting alternative for roofing. They are installed using the same process to the installation of other roofing materials. The next steps will show you how to install clay roof tiles.
The process of a new Roof Installation in Santa Clarita can be stressful and challenging. You’d need a professional in order to have a flawless new Roof Installation in Santa Clarita! SoCal Green is here to assist you with your roofing maintenance and installation needs.
1. Make sure to prepare the area in which tiles will be placed. This space should be free of debris and vegetation. If you’re working on a pitched roof, be sure that your roof is well-level.
2. Place the felt paper or synthetic underlayment on the prepared area. This will keep roofing materials safe from weather elements.
3. Start putting the tiles in at the bottom of the area, moving upwards. Check that each tile is properly installed before moving to the next.
4. Continue to lay your tiles till the whole area is complete.
5. Examine the tiles and ensure they’re secured. If you notice any tiles are loose, secure them again.
6. Allow the tiles to cure for at least 24 hours before walking on them.
Secure the tiles to the battens
After you’ve put in the battens, it is time to secure tile to the battens. You will need to use nails or screws to do this, depending on the type of tile you’re using. Be sure to predrill the holes to accommodate screws or nails to avoid splitting the tile. Start at the lowest row of tiles, and move upwards by overlapping each row while you go. Once you have reached the top row, you might require cutting the tiles to make them fit. Make sure to use a tile cutter or nippers designed specifically for clay tiles in order to prevent them from breaking.
Align tiles with the correct overlap
To make sure your tiles have the proper overlap Use the level to mark a line on the center of the course you are starting. This line should be level with the tiles’ tops on either side. Once the line has been leveled, use chalk lines to draw a line perpendicular to the beginning course. This line will help you align your tiles as you put them in place.
Cut tiles into the shape you want with the help of a tile cutter
Most clay roofing tiles are cut to fit with the help of a tile cutter. It is important to ensure that you have the correct size cutter for the tile you’re using. For smaller tiles, you can use a manual tile cutter. For larger tiles, you’ll require an electrical tile cutter.
First, mark the tile on which you want to make the cut. Then, place the tile cutter onto the tile and score it on the line you have marked. Finally you can snap the tile on the score lines to split it.
Install half round tiles at corners
It is important to install half-round tiles onto the roof’s corners first. The corners will be protected and water is directed away from the building and will not collect within the corner. After the half round tiles are installed then the remainder of the roof can be tiled the same way.
Apply mortar to cement tiles to ensure they are secure.
Installing clay roof tiles can be a little more complicated than different types of roofing but the result is worthwhile. Tiles made of clay last for a long time and are very durable and therefore a good option for those who live in areas that have severe weather conditions.
One of the primary steps in installing clay roof tiles is adding mortar to hold the tiles in place. Mortar is a type of cement used to attach the tiles to the roof. It is important to use the best quality mortar that is approved for outdoor use.
Apply sealant to tiles for additional waterproofing
After you’ve put in the battens, then install the clay roof tiles. Start at the bottom and move up the ladder, applying sealant on the tiles to give them extra waterproofing. Make sure the tiles are equally spaced and the sealant is properly applied to avoid any leaks.
Check tiles for cracks or damage
When installing clay roof tiles make sure you inspect the tiles for cracks or damage. Cracks can allow water to enter the tile and cause damages to roofs. Also, make sure you examine the tiles for the proper fit and size before installation.
In the end, putting up clay roof tiles is not a difficult job, but it is important to follow the steps carefully. Make sure to wear gloves and a dust mask and to be in a ventilated area. With a little care and attention to the smallest of details, you’ll be able to install your clay roof tiles efficiently.
Do I need to put in Attic Vents or Roof Turbine in Santa Clarita?
