SoCal Green Roofing Of Los Angeles
License# 1057764
Serving in Los Angeles & Surrounding Areas
License# 1057764

What Is The Correct Way To Set Up Metal Roofing In Santa Clarita?

If you’re building a new roof made of metal or replacing one you have it’s important to follow the right installation process. Not only will it will save you lots of time and money, but you’ll be in a position to enjoy the new roof for many years to be.

An new Roof Installation in Santa Clarita can be difficult and demanding. You’ll need a professional order to have a flawless new Roof Installation in Santa Clarita! SoCal Green can assist you with your Roof Installation in Santa Claritas and maintenance needs.

Exposed fastener

Selecting the best visible fastener can be the most important element in the metal roofing installation process. Using the wrong type of fastener could cause damage and leaks. The most effective fasteners are those that are made through the manufacture and specifically designed to work with metal panels. If you’re not sure what to go with consult a roofer who is an expert for guidance.

The International Building Code recommends the use of sealing fastener panels. In most cases, this means you’ll have to put in an rubber washer with the fastener. This will help increase the weatherproofness of the fastener panel.

It is also possible to use butyl seam sealant to seal the ribs of the second panel. This can stop capillary action from forming. The use of the right fastener is a great method to ensure that your metal roof will last a long time.

Stamped shingle-look

If you’re considering the replacement of your roof or replacing an old roof you must know the proper method to install stamped shingle-look roofing. There are numerous options and you will want to make sure that you choose the appropriate material for your needs.

A stamped shingle made of metal is a small modular panel that features deep grooves on all four sides that engage with one another through a specific stamping process. This creates a look that resembles tile, shake slate, asphalt, or tile shingles.

Stamped shingle-look metal roofing comes in a range of metallic and matte colors. Usually, stamped metal shingles are made of painted PVDF covered steel however other materials are also in stock.

Many manufacturers provide a paint guarantee for their shingles with stamped designs. While this doesn’t cover edge corrosion or failures due to stains from storage that are wet, it does mean that you can be confident that the color won’t fade.


Keeping metal panels square and in good alignment is crucial to the long-term durability and effectiveness of your roof system. Several methods of securing vertically oriented panels are possible. One method is to use the seam cap. Another method is the use of a locking mechanism integrated into. Other fastening methods may involve separate clips or hidden fasteners. These methods must be installed according to the instructions of the manufacturer.

To ensure proper squareness the panels must be erected on an even substructure. This means the width of the sheathing has to not exceed 3/8″ in a variance of 40 feet and not more than 1/4″ in a 20-foot variance.

In addition to this, the distance between the eave and the ridge should be measured. This will determine the length of each panel. This measurement is necessary to determine the proper quantity of material required for the project.

Correctly fastening screws

Choosing the right fasteners is essential to ensure the long life the metal roofing. The wrong choice of fastener could result in a leaky roof or other maintenance issues.

When installing metal roofing There are numerous kinds of screws that you can pick from. The most common screw is self-drilling. They are used to attach a single metal panel, or a collection of panels. They are different in their size and thread patterns, depending on the type of panel. They also come with several drill points. Most popular are the #5 and #3 drill points, which are able to drill into steel up to 0.500 thickness.

For screws that are longer it is recommended to drill the holes prior to drilling to ensure that they are correctly set. This will reduce the likelihood to have the screw driven with an angle, and increase the chance of a stronger and tighter seal.

Find a metal roofing contractor

Choosing a metal roofing contractor is among the most important choices you’ll make when you’re remodeling your home. You want to choose an experienced and trustworthy contractor that you can trust.

When you hire a contractor, you must inquire about his or her general experience in metal roofing. It is also a good idea to check whether the contractor has a license.

Many homeowners are willing spend a bit more to get a courteous, responsive and knowledgeable metal roofing contractor. When choosing a contractor it is important to know how the company handles unexpected issues during the installation process.

It is also important to see if the company is associated with or trade association. They have strict rules and guidelines to ensure that the work is of high quality.

How To Install Flashing On Metal Roof in Santa Clarita?
What Is The Correct Way to install Roof Flashing in Santa Clarita?

Recent Posts

Recent Posts

Request a
Free Quote

Our mission at SoCal Green Roofing & Builders is to be your go-to roofing contractor in the Los Angeles area. We provide services throughout the greater Los Angeles area, Orange, San Bernardino, and Ventura Counties.


Schedule Your Appointment

"*" indicates required fields

MM slash DD slash YYYY
This field is for validation purposes and should be left unchanged.