When it comes to roofing there are plenty of options available in the marketplace. One of the most popular choices for homeowners is the tpo roofing. Tpo roofing is renowned for its toughness and capability to endure extreme weather conditions. There are however a lot of people who are wondering whether it is possible to have tpo roofing installed over plywood.
Are you in search of affordable local roofer in Atwood? Look no further because SoCal Green Roofing is renowned local roofer in Atwood that provides roof installation and maintenance services.
The answer to this question is that yes, the roofing system can be set up on top of plywood. However, there are couple of things you have to keep in mind prior to installing the tpo roofing over plywood. The first is that it is essential to ensure your plywood is in great condition. If the plywood is not in good condition, then it is probable that the tpo roofing will not be able to stick to the plywood in a proper manner.
Another thing to keep in mind is the thickness of the plywood. The thicker the plywood the more sturdy. This is
Check that the plywood is in good condition
1. Check that the plywood is in good shape. If not, replace it with new plywood.
2. Determine the thickness of the plywood. It should be at minimum 3/8 inch thick, but not more than 1 inch thick.
3. Cut the plywood into pieces measuring approximately 4 feet by 8 feet.
4. Secure the plywood with roof trusses with 8d nails. Space the nails at intervals of 8 inches.
5. The plywood should be covered with 30 pounds of felt paper.
6. Install the tarpaper over the paper that you have felt.
7. Install the tpo roofing membrane on top of the tarpaper.
Make sure there aren’t any major gaps in the plywood
When installing a TPO roof, it’s important to make sure there aren’t any gaps in the plywood. In the event of gaps, TPO roofing material could be damaged. TPO roofing material may not be able to adhere correctly and cause leaks.
Remove any roofing material currently on the roof
If you’re considering installing TPO roofing over plywood, there are a few things you need to do first. First, you must remove any existing roofing material. This includes roof shingles, tar paper or other debris that may have accumulated on the top of your plywood. Once the surface is clean You’ll have to check the wood for signs of damage. If there are any cracked, split, or damaged boards, you’ll have to replace them prior to moving on.
Make sure that the plywood is properly sealed
If you’re installing an TPO roofing system on plywood, it is important to make sure that the plywood is properly sealed. If it hasn’t been sealed, the TPO roofing system could not adhere properly and could eventually leak. To seal the plywood, simply lay a coat of roofing cement to the entire surface. Once the cement is dry and dried, you can install the TPO roof system.
Install a vapor barrier
If you’re installing a TPO roofing system on plywood, you’ll need install a vapor barrier prior to installation. This will prevent moisture from leaking into the plywood, which can damage the roof. There are many choices for vapor barriers so talk to your roofing contractor to see the best option for you.
Install an ice and water shield
If you’re planning to install an water and ice shield on your roof it is important to ensure that the plywood is in good working order first. Once you’ve done that, you can install the shield following the directions of the manufacturer.
Install TPO roofing membrane
Yes, TPO roofing membrane can be erected over plywood. This is a standard installation technique, particularly when retrofitting an existing roof. The membrane is secured to the plywood with special roofing nails or screws , and washers. The fasteners should be compatible with the membrane as well as the plywood to provide a watertight seal.
Apply adhesive to attach the TPO roofing onto the plywood
Yes, TPO roofing is able to be installed over plywood, but you’ll have to take a few additional steps to ensure a secure installation. First, you’ll need to apply an adhesive on the plywood to secure the TPO roofing. Then, you’ll need to install some type of fastener (like nail or screw) every couple of feet to secure the roofing.
Yes, TPO roofing can be placed over plywood. It is important to ensure that the plywood is in good working order and properly sealed prior to adding the TPO roofing. In the event that it is not, you could end up with leaks or other damage to your roof.
