When it comes to roofing there are plenty of options available on the market. One of the most popular options for homeowners is tpo roofing. Tpo roofing is renowned for its toughness and capability to endure extreme weather conditions. But, there are a lot of people who are wondering whether it is possible to have tpo roofing placed over plywood.
Are you in search of affordable local roofer in Gardena? Do not look any further as SoCal Green Roofing is renowned local roofer in Gardena that provides roofing installation and maintenance.
The answer is that yes, tpo roofing can be installed on top of plywood. However, there are few points to keep in mind before you install tpo roofing over plywood. In the first place, it is essential to ensure you have plywood in excellent working order. If the plywood isn’t in good shape, it is probable that the tpo roofing will not be able to bond to the plywood in a proper manner.
Another thing to bear in your mind is the quality of plywood. The thicker the plywood, the more sturdy. This is
Check that the plywood is in good shape
1. Verify that your plywood is in good working order. If not, you should replace it with new plywood.
2. Measure the thickness of the plywood. It should be at least 3/8 inch thick, but no more than 1 inch .
3. Cut the pieces of plywood into pieces that are 4 feet by 8 feet.
4. Attach the plywood to the roof trusses using 8d nails. Space the nails at intervals of 8 inches.
5. Overlap the plywood with 30-pound felt paper.
6. Apply the tarpaper to the felt paper.
7. Install the roofing membrane tpo onto the asphalt.
Ensure there are no major gappings in the plywood
In the process of installing a TPO roof, it’s important to ensure that there aren’t any holes in the plywood. Otherwise, TPO roofing material could be damaged. TPO roofing material could not stick properly and cause leaks.
Remove any roofing material currently on the roof
If you’re planning on installing TPO roofing on plywood, there are a few things to consider first. First, you need to take away any roofing material that is currently in use. This includes roofing shingles, tar papers, or other debris that might remain on the wood’s surface. When the surface is cleaned, you’ll need to inspect the plywood for any signs of damage. If you find any damaged, cracked, split, or damaged boards, you’ll need to replace them before proceeding.
Verify that the plywood has been properly sealed
If you’re installing a TPO roofing system over plywood, it’s important to ensure that the plywood is properly sealed. If it’s not properly sealed then it’s possible that the TPO roofing system could not adhere properly and could eventually leak. To seal the plywood, simply put a thin layer of roofing cement over every surface. Once the cement has dried, you’re ready to install your TPO roofing material.
Install a vapor barrier
If you’re planning to install the TPO roofing system on plywood, you’ll need to install a vapor barrier prior to installation. This will stop water from getting into the plywood and damaging the roof. There are a few different choices for vapor barriers so talk to your roofing contractor about the best option for you.
Install an ice and water shield
If you’re planning to install an water and ice shield on your roof, you’ll need to make sure that the plywood is in good shape first. After that you’re able to install the shield in accordance with the manufacturer’s instructions.
Installation of TPO roofing membrane
It is true that TPO roofing membrane can be erected on plywood. This is a typical installation technique, particularly for retrofitting an older roof. The membrane is secured to the plywood with special roofing nails or screws and washers. The fasteners have to match the quality of the membrane as well as the plywood in order to form a watertight seal.
Use an adhesive to fix the TPO roofing to the plywood
Yes, TPO roofing can be placed over plywood, however it is necessary to take additional steps to ensure that your installation is secure. First, you’ll need to apply an adhesive on the plywood to secure your TPO roofing. In the next step, you’ll need install some type of fastener (like a screw or nail) every couple of feet to further make sure that the roof is secure.
In conclusion, yes, TPO roofing can be placed over plywood. It is important to ensure that the plywood is in good condition and properly sealed prior to adding the TPO roofing. Otherwise, you may end up with problems with your roof. your roofing.
Do I Really Need a Roofer in Gardena?
Do roofing contractors work during The Winter in Gardena?