Installing hurricane straps is a relatively simple procedure that can be completed in a few hours. It is the first thing to pinpoint the position of the rafters within your roof. After the rafters are identified then the next step is to measure and cut the hurricane straps into the suitable length. After the straps have been cut, it is now time to attach or screw the straps into the rafters. After the hurricane straps are put in place then following step installing these hurricane clips. The hurricane clips must be installed at the base of the rafters and at the highest point of the rafters. The last step is to attach the roofing screws or nails.
A new Roof Installation in Pomona can be stressful and challenging. It is essential to hire a professional in order to have a flawless new Roof Installation in Pomona! SoCal Green will provide you with your roof maintenance and installations.
1. Check the roof for the amount and location on the straps for hurricanes.
2. Purchase the necessary amount of straps for hurricanes.
3. Attach the straps for hurricanes on the roof you have already installed, following the directions of the manufacturer.
4. Examine the roof frequently to make sure that the hurricane straps are in good working order and operating effectively.
Cut the straps to the appropriate size.
For installing hurricane straps on the roof of your home, it is necessary take measurements and then cut them according to the size. After you’ve got the straps cut to the proper size, you’ll need to attach they to the roofing. To do this, you’ll need make holes in the roof and then screw the straps onto the roof. Once the straps are set, you’ll have attach them to hurricane clips. The hurricane clips require to be fixed to the wall.
Drill holes in the straps in order to match the rafters that are already in place.
If your home was constructed before the onset of Hurricane Andrew in 1992, it likely doesn’t have the proper hurricane straps. That’s why it’s important to install them yourself in order to make sure your home is ready for the next big storm. Here’s how:
1. Take a measurement of the length of your rafters. The straps must be long enough to cover at least two rafters.
2. Drill holes in the straps to match the rafters that are already in place.
3. Attach the straps to the rafters with screws or nails.
4. Repeat the process for the other rafters that are on your roof.
By taking the time to install hurricane straps, you can rest assured that your home is equipped for the next storm.
Apply a generous amount of construction glue to the strap’s back.
Applying a substantial amount of construction adhesive to the straps’ back is a key step in ensuring that they stay in place during a hurricane. Make sure you apply the adhesive evenly and on each of the four straps. Once the adhesive has been placed, apply the straps with a firm press into place onto the roofing.
Attach the straps to existing rafters.
The hurricane straps are an essential element of securing your home from hurricanes. They keep your roof attached to the walls during high winds, keeping it from being blown away.
If your house doesn’t have hurricane straps, you can put them in yourself. The first step is to identify the rafters that are currently on your roof. Then, attach the straps to the rafters with nails or screws. Make sure the straps are fastened securely so they can withstand high winds.
Secure the straps with nail or screws galvanized.
Once you have those hurricane straps it is time to secure them to the roof. The first step is to make sure they are secure, so use Galvanized nails or screws to make sure you have a tight fit. It is recommended to put the straps approximately two feet apart, at a minimum. Also, make sure they are properly fastened to the trusses or rafters. If you’re not sure how to accomplish this, you can consult a professional contractor.
Cover the straps with the caulk and sealant.
If you are installing hurricane straps on the roof of an old one, you’ll have to secure the straps using sealing caulk, or sealant. This will make sure that the straps remain secured and won’t break in high winds.
Examine the installation to be sure the straps are properly secured.
When installing hurricane straps on the roof of an already existing structure, be sure to inspect the installation to make sure that the straps are secured properly. In the majority of cases the straps must be put in place at the point where the trusses or rafters join the wall’s top plate. The straps should be sufficient in length to extend beyond the ends of the trusses or rafters and should be fixed using screws or nails that are at least 3 inches long.
In conclusion they are an essential element to protect your home from damage caused by hurricanes. Installation is fairly simple and can be done in a few hours. If you live in an area that is prone to hurricanes, make sure you take the time to set up hurricane straps on your existing roof.