Serving Residents in Los Angeles & Surrounding Areas
License# 1057764
Serving in Los Angeles & Surrounding Areas
License# 1057764
Blog

How Do I Install Hurricane Straps On Existing Roof In Valinda?

Installing hurricane straps is a relatively easy process which can be accomplished in a few hours. The first step is to determine the position of the rafters within your roof. Once the rafters are located then the next step is to measure and cut the hurricane straps to the suitable length. After the straps have been cut and trimmed, following is the process to attach or screw the straps to the rafters. After the hurricane straps are installed then the next step is to install these hurricane clips. The hurricane clips need to be placed at the bottom of the rafters as well as at the highest point of the rafters. The last step is to put in the roofing nails or screws.

The process of a new Roof Installation in Valinda can be difficult and demanding. You’d need a professional in order to get the perfect new Roof Installation in Valinda! SoCal Green is here to assist you with your roof maintenance and installations.

1. Assess the roof to determine the amount and location of hurricane straps.

2. Get the needed amount of hurricane straps.

3. Install the hurricane straps to the existing roof, following the directions of the manufacturer.

4. Examine the roof frequently to ensure your hurricane straps remain in great shape and operating properly.

Measure and cut the straps to the appropriate size.

For installing hurricane straps on an already existing roofing structure, you’ll have take measurements and then cut them to size. Once the straps are cut to the correct dimensions, you’ll need to secure they to the roofing. For this, you’ll need drill holes in the roof before screwing the straps into place. Once the straps are installed, you’ll need to attach them to the hurricane clips. The hurricane clips will then have to be connected onto the wall.

Pre-drill holes in the straps to make them match with the rafters that are already in place.

If your home was constructed before the onset of Hurricane Andrew which hit in 1992 it likely doesn’t have proper hurricane straps. It’s the reason it’s so important to install them yourself in order to ensure your home is prepared for the next storm to hit. Here’s how:

1. Take a measurement of the width that your rafters are. The straps should be long enough to span at minimum two rafters.

2. Make holes for the straps to match the rafters already in place.

3. Attach the straps to the rafters with screws or nails.

4. Repeat the process for the other rafters on your roof.

When you decide to install hurricane straps, you’ll have peace of mind knowing that your home is ready for the next major storm.

Apply a generous amount of construction adhesive to the straps’ back.

Applying a substantial amount of construction adhesive on the back of the straps is a key step in making sure that they stay in place during a hurricane. Make sure you apply the adhesive evenly and to each of the four straps. Once the adhesive is placed, press the straps firmly into place over the top.

Attach the straps to the existing rafters.

The hurricane straps are an essential part of hurricane-proofing your home. They help ensure that your roof stays attached to the walls during high winds, keeping it from being removed.

If your home isn’t equipped with hurricane straps, you could install them yourself. The first step is to identify the rafters that are currently on your roof. Then, secure them to the rafters with screws or nails. Be sure that the straps are securely fastened so that they can withstand the force of high winds.

Secure the straps with nail or screws galvanized.

After you have installed those hurricane straps you need to fix them to the roof. The first step is to ensure they’re secured, so make use of nail or screws that are galvanized to guarantee a snug fit. You should place the straps approximately two feet apart, at the minimum, and make sure they’re securely attached with rafters or the trusses. If you’re unsure of how to go about this, ask an experienced contractor.

Seal the straps with sealing caulk, or sealant.

If you’re installing hurricane straps to an existing roof, you’ll have to seal the straps with caulk or sealant. This will make sure that the straps remain secure and won’t come loose in high winds.

Examine the installation to be sure the straps are properly secured.

When installing hurricane straps on any roof that is already in place, be certain to check the structure to ensure that the straps are secured properly. In most cases the straps need to be put in place in the area where the trusses or rafters meet the top plate of the wall. The straps should be long enough to extend over the end of the trusses or rafters and must be secured with nails or screws that are at least 3 inches long.

In the end the hurricane straps are a crucial element to protect your home from the effects of hurricanes. Installing them is relatively simple and can be accomplished in a few hours. If you live in an area that is susceptible to hurricanes, be sure to take the time to install hurricane straps on your existing roof.

How Install Roll Roofing in Valinda?
How Do I Install A Tin Roof in Valinda?

Request a
Free Quote

Our mission at SoCal Green Roofing & Builders is to be your go-to roofing contractor in the Los Angeles area. We provide services throughout the greater Los Angeles area, Orange, San Bernardino, and Ventura Counties.

CALL US NOW

Schedule Your Appointment

"*" indicates required fields

MM slash DD slash YYYY
This field is for validation purposes and should be left unchanged.