Serving Residents in Los Angeles & Surrounding Areas
License# 1057764
Serving in Los Angeles & Surrounding Areas
License# 1057764
Blog

How Do I Install Roll Roofing In Lancaster?

If you’re considering installing roll roofing, you’ve come to the right place. In this blog post, we’ll show you how to install roll roofing so that you’ll have a leak-free roof for the years to be. We’ll discuss everything from cutting and measuring the roofing to installing the sealant and flashing. Also, whether you’re a roofing professional or DIYer this blog post will have you covered.

An new Roof Installation in Lancaster can be stressful and challenging. It is essential to hire a professional in order to get the perfect new Roof Installation in Lancaster! SoCal Green can provide you with your Roof Installation in Lancasters and maintenance needs.

Measure the roof area

Take a look at the roof’s area to determine the amount of roll roofing you’ll need. To calculate this, multiply the width and length of the roofing in inches to calculate the square footage. Add your square footage for dormers, chimneys, or any other protrusions. Then, multiply this figure by 1.1 to take into account waste. For instance, if your roof is 100 square feet with two dormers, it will require 121 square feet of roofing.

Buy the essential supplies

Get the essential items. This includes the roll roofing and any screws, nails, sealant, or other materials required for installation. You should purchase enough material to complete the roof and a few extra dollars in the event of any mistakes or damage.

Remove any roofing material currently on the roof

The next step is to take off any roofing materials that are in use like shingles or tiles. This can be accomplished with the pry bar or utility knife. Be sure to wear protective glasses and gloves to shield you from the sharp edge. If you’re working on asphalt shingles, then you’ll also need to remove the felt paper or tar paper under the.

Install an underlayment

If you’re installing roll roofing, you need to put in an underlayment prior to you start. The underlayment adds an extra layer of protection for your roof, and it can help to prolong the life of your roofing material. There are a few different kinds of underlayment that are available, so be sure to pick one that’s suitable for your climate and your roofing material.

Calculate the length of the roll roofing

To determine the roll roof’s length you’ll require, take measurements of the length and width of the roof area you’d like to cover. Add to the total length roofing’s sides. Once you have this number, you can divide it by the width of the roll roofing material you will be using. This will provide you with the number of rolls you are required to buy.

Begin to install roll roofing

Roll roofing installation is fairly simple and easy process. However there are some aspects you should remember to make sure that the installation is successful.

Before you start, ensure that the surface you’re putting the roofing on is free of any debris. Any dirt or debris that gets on the surface can hinder the roof’s ability to stick properly.

Next, you’ll need to measure the surface you’re hiring the roof on. This will make sure you have enough roofing material to cover the entire surface.

After you have your materials and the surface is completed, you are able to begin laying down the roofing roll. Start at one end of the surface and unroll your roofing piece by section as you proceed. Be sure to cross-leaf both edges on each roofing piece by 2 inches.

Fix the roof in place using roofing nails each 6 to 8 inches. Lastly, trim any excess roofing material on the outside.

Make sure the roofing is secured with nails

When installing roll roofing, ensure that you fix the roofing using nails. This will ensure that the roofing remains in place and will not fall off. It is essential to use the proper size and type of nails for securing the roof. Be sure to consult with an expert roofer to ensure that you’re using appropriate nails.

Apply sealant to ensure correct installation

Once you have the roofing material cut to the size you want and then nailed in place it is essential to seal the edges. This will ensure the roofing is properly installed and will not come loose over time. Sealants are available at most hardware stores.

In conclusion, installing roll roofing is a relatively simple task that can be completed within a couple of hours. However, it is important to make sure your surface is clean and smooth before starting, and that the roll roofing is secured properly for a lasting and effective seal.

When To Install New Roof in Lancaster?
Will Homeowner Insurance Cover Improperly Installed Roofs in Lancaster?

Request a
Free Quote

Our mission at SoCal Green Roofing & Builders is to be your go-to roofing contractor in the Los Angeles area. We provide services throughout the greater Los Angeles area, Orange, San Bernardino, and Ventura Counties.

CALL US NOW

Schedule Your Appointment

"*" indicates required fields

MM slash DD slash YYYY
This field is for validation purposes and should be left unchanged.