Serving Residents in Los Angeles & Surrounding Areas
License# 1057764
Serving in Los Angeles & Surrounding Areas
License# 1057764
Blog

How Do I Restore A Roof With Foam In Glendora?

If you’ve got an asphalt roof, it’s important to know how to fix it correctly. Foam roofs are a popular choice for many commercial and industrial buildings because they are durable and provide excellent insulation. But like any roof, they are susceptible to leaks and other issues over time. It’s therefore important to be aware of how to repair a foam roof.

Do you need Roof Repair in Glendora and don’t know who to ask? Well, worry no more! SoCal Green Roofing is here to assist you in the Roof Repair in Glendora at an affordable price.

There are many ways to fix the foam roof, based on the severity of damage. If you have small leaks then you can apply a sealant to patch the hole. For larger leaks, you may need to replace the entire area of foam. And for really serious damage you might need to completely re-foam your roof.

No matter what type of repair you need, it’s important to work with a professional roofing contractor with experience with foam roofs. They will know the best way to repair your roof, and will make sure the job is done right.

Examine any damages to the foam roof

Damage to the roof made of foam must be evaluated as quickly as is possible to determine the best way to repair. The roofs of foam are subject to many different types of damage, from physical impact to UV degrading. Depending on the extent that the issue is, a roof made of foam may be able to be repaired with a simple repair kit or require a more extensive repair.

Cleanse the area affected and apply primer

If you’re repairing an existing roof with foam, the first step is to wash the area that is damaged and then apply primer. This will allow the new foam to adhere to the roof’s existing structure and create a waterproof seal. Also, you’ll want to place tape to parts of the repair area to make sure the new foam doesn’t leak.

Cut a piece of reinforced EPDM membrane to size

If you have a foam roof, you know that it is an excellent asset for your house. However, just like any roof with foam roofs, foam roofs may begin to leak over time. If this happens it’s time to fix the roof in order to avoid further destruction.

The best way to accomplish this is cutting a piece reinforced EPDM membrane to size and then install it over the leak. It will form a barrier that will prevent water from entering. It is essential to ensure you have the membrane properly protected around the edges to guarantee a watertight seal.

Attach the membrane to the roof of foam

One of the most common problems for foam roofs is that their membrane can become detached, allowing water to seep into the structure and cause damage to the structure. If you see any signs of damage from water, it’s essential to act quickly to repair the roof and prevent further damage.

One of the best ways to fix a damaged membrane is to secure it to the foam roof. This can be done using a high-performance adhesive or by using new fasteners. In the event that damage has become extensive it may be necessary for replacement of the whole membrane.

Apply a coating of contact cement to the membrane

Contact cement works as a fast drying adhesive that is employed to glue two surfaces. It’s ideal for fixing the roof of a foam structure because it creates a strong bond that resists weathering and will not become brittle as time passes.

To apply the cement to contact, you must first wash the surfaces that you’ll bond and then roughen them up a bit with sandpaper. This will allow the cement to bond better. The next step is to apply a thin layer cement to both surfaces and allow it to dry for approximately 15 minutes. Once it’s dry, press the two surfaces together firmly and let the bond cure for 24 hours before walking on the roof or exposing it to weather.

Cut any polyiso foam boards to size

The polyiso boards commonly employed in roofing projects to provide insulation and a barrier against the elements. If the roof you’ve got has been damaged or damaged in any way, then you’ll have to cut the polyiso foam boards into the proper size to fix it.

Here’s how:

1. Measure the roof’s area that needs to be repaired and mark the dimensions on the foam board made of polyiso.

2. Utilize a straight edge make cuts in the foam according to the lines that are marked.

3. Place the foam board cut in the repair area, according to the instructions of the manufacturer.

The boards are secured by securing the polyiso foam to the membrane

Secure the polyiso foam boards to the membrane by using washers and screws. Make sure the washers are of the same dimensions that the screws. Make use of a 1/4″ drilling bit make pilot holes through the foam board, and into the membrane. Begin at the lowest point of the panel and work your way up.

Finish by applying a coat of an elastomeric sealant

Then, finish with a layer of elastomeric sealant. This will help shield your roof from the elements and extend its lifespan.

In conclusion, repairing a foam roof can be an easy process. But, it’s crucial to take all the steps to ensure repairs are done properly and that the roof isn’t further damaged. With just a bit of time and effort, you’ll repair your foam roof and looking as good as new.

How To Fix A Crack In A Flat Roof in Glendora?

Request a
Free Quote

Our mission at SoCal Green Roofing & Builders is to be your go-to roofing contractor in the Los Angeles area. We provide services throughout the greater Los Angeles area, Orange, San Bernardino, and Ventura Counties.

CALL US NOW

Schedule Your Appointment

"*" indicates required fields

MM slash DD slash YYYY
This field is for validation purposes and should be left unchanged.