Serving Residents in Los Angeles & Surrounding Areas
License# 1057764
Serving in Los Angeles & Surrounding Areas
License# 1057764
Blog

How To Install Clay Roof Tiles In La Verne?

Clay roof tiles are a beautiful and durable choice for roofing. They are installed with an installation process similar to the process used to install other roofing materials. The steps below will guide you through the steps to lay clay roof tiles.

A new Roof Installation in La Verne can be stressful and challenging. You’ll need a professional order to get the perfect new Roof Installation in La Verne! SoCal Green can help you with roofing maintenance and installation needs.

1. Make sure to prepare the area in which the tiles will be installed. The area must be clear of any debris or vegetation. If you’re working on a sloped roof, be sure that the area is well-level.

2. Apply an overlay of foam paper, or synthetic underlayment on the surface you’ve prepared. This will help keep roofing materials safe from weather elements.

3. Start putting the tiles in on the bottom of the area, working your way up. Make sure each tile is properly installed before moving to the next tile.

4. Continue to lay the tiles until the total area is completely fully covered.

5. Examine the tiles and make sure they’re secured. If any tiles are loose, repair them.

6. Allow the tiles to cure for at least 24hrs prior to walking on them.

Fix the tiles to battens

Once you’ve installed the battens, it is time to secure tile to the battens. You will need to use screws or nails for this, based on the type of tile you are using. Make sure you drill the holes for the screws or nails to prevent the tile from splitting. Begin with the lower row of tiles and work your way up and overlapping each row while you go. When you reach the top row, you may require cutting the tiles to make them fit. Make sure to employ a tile cutter, or nippers specifically designed for clay tiles to prevent them from breaking.

Align tiles using the appropriate overlap

To make sure that your tiles have the correct overlap, use a level to mark an area in the center of your course. This line should be level with the top of the tiles on either side. Once your line is level, use a chalk line to snap parallel to the starting course. This line will assist you to ensure that your tiles are aligned when you set them up.

Cut tiles to fit using the help of a tile cutter

Most clay roofing tiles are cut with an appropriate tile cutter. You’ll have to ensure that you have the correct dimension cutter to fit the size of tile that you’re working with. For smaller tiles, you can use a manual tile cutter. If you want to cut larger tiles, then need an electrical tile cutter.

First, mark the tile on which you’d like to make the cut. After that, you can place the tile cutter onto the tile and score it in the direction of the mark. Then take the tile and snap it along the scored line to break it.

Install half-round tiles on corners

It is crucial to add half-round tiles onto the roof’s corners first. It will guarantee that the water will be directed away from the building and not collect within the corner. After the half round tiles are in place then the remainder of the roof can be tiled in the same manner.

Add mortar to secure tiles

Installing clay roofing tiles can be a little more complicated than other kinds of roofing, however the end result is enough to warrant the time and effort. Clay tiles have a long lifespan and are extremely durable and therefore a good option for those who live in areas that have severe weather conditions.

One of the primary steps in installing clay roof tiles is to apply mortar to fix the tiles. Mortar is a form of cement used to bond the tiles to the roof. It is crucial to use a good quality mortar that is approved as suitable for use outdoors.

Apply sealant on tiles to provide waterproofing

Once you’ve installed the battens, you can now install the roof tiles made of clay. Begin at the bottom and proceed to the top and apply sealant to the tiles for extra waterproofing. Make sure that the tiles are evenly spaced and the sealant is properly applied in order to avoid any leaks.

Inspect tiles for any damaged or cracked tiles.

When you are installing tiles for your roof made of clay make sure you inspect the tiles for any damages or cracks. Cracks can let water seep through the tiles and cause damages to roofs. Also, be sure to examine the tiles for the proper fit and size before installation.

In the end, installing clay roof tiles is not an easy task, however it is important to follow the directions with care. Be sure to wear gloves and a dust mask, and be in a ventilated area. With a little care and attention to detail, you will be able to put up your roof tiles made of clay with ease.

Can A New Roof be Instretched in Winter in La Verne?
Are Roof Vents Replaced When A New Roof Is Installed in La Verne?

Request a
Free Quote

Our mission at SoCal Green Roofing & Builders is to be your go-to roofing contractor in the Los Angeles area. We provide services throughout the greater Los Angeles area, Orange, San Bernardino, and Ventura Counties.

CALL US NOW

Schedule Your Appointment

"*" indicates required fields

MM slash DD slash YYYY
This field is for validation purposes and should be left unchanged.