Serving Residents in Los Angeles & Surrounding Areas
License# 1057764
Serving in Los Angeles & Surrounding Areas
License# 1057764
Blog

How To Install Hurricane Straps On Existing Roof In Artesia?

The installation of hurricane straps is a relatively simple procedure that can be completed in a few hours. First, determine the location of the rafters in your roof. Once the rafters are found, the second step will be to cut and measure the hurricane straps to the proper length. Once the straps are cut, it is now time to attach or screw the straps into the rafters. After the hurricane straps are installed, the next step is installing these hurricane clips. The hurricane clips must be installed at the bottom of the rafters as well as on top of the rafters. The final step is to install the roofing screws or nails.

An new Roof Installation in Artesia can be stressful and challenging. You’d need a professional in order to have a flawless new Roof Installation in Artesia! SoCal Green will provide you with your Roof Installation in Artesias and maintenance needs.

1. Check the roof for the number and placement of hurricane straps.

2. Get the needed amount of straps for hurricanes.

3. Attach the straps for hurricanes onto the roof you have already installed, following the manufacturer’s instructions.

4. Check the roof on a regular basis to make sure that the hurricane straps are in good working order and working correctly.

Measure and cut the straps to the appropriate size.

To install hurricane straps on the roof of your home, you’ll need to measure and cut the straps to size. Once the straps are cut to the proper size, you’ll need to connect they to the roofing. To do this, you’ll need make holes in the roof before screwing the straps into place. Once the straps are set, you’ll have attach them to hurricane clips. The hurricane clips require to be fixed to the wall.

Drill holes in the straps in order to match the existing rafters.

If your home was constructed before Hurricane Andrew of 1992 it likely doesn’t have proper hurricane straps. This is why it’s crucial to put them in yourself to make sure your home is ready for the next storm to hit. Here’s how:

1. Measure the dimensions of the rafters. The straps need to be wide enough to cover at least two rafters.

2. Drill holes in the straps to match the rafters already in place.

3. Connect the straps to the rafters using screws or nails.

4. Repeat the process for all the rafters on your roof.

If you take the time to install hurricane straps you can rest assured knowing that your home is prepared for the next big storm.

Apply a large amount of construction adhesive on the straps’ back.

Applying a large amount of construction adhesive on the back of the straps is the most important step in ensuring that they stay in place during a hurricane. Make sure you apply the adhesive evenly and on the entire strap. Once the adhesive has been put on, you can put the straps in a secure position on the roof.

Attach the straps to the existing rafters.

Hurricane straps are an important part of hurricane-proofing your home. They keep your roof attached to your walls during strong winds, preventing it from being destroyed by the wind.

If your house doesn’t have hurricane straps, it is possible to put them in yourself. Begin by identifying the rafters that are currently on your roof. Then, you can attach your straps onto the roof rafters with screws or nails. Be sure that the straps are fastened securely so that they can withstand the force of high winds.

Make sure the straps are secured with the galvanized screw or nail.

After you have installed those hurricane straps it is time to secure them to your roof. It is crucial to ensure they’re secured, so make use of Galvanized nails or screws to make sure you have a tight fit. It is recommended to put the straps about two feet apart at the minimum, and make sure they are properly fastened with rafters or the trusses. If you’re not sure of how to do this, consult a professional contractor.

Cover the straps with the caulk and sealant.

If you’re installing hurricane straps on an already existing roofing structure, it is necessary to seal the straps with sealing caulk, or sealant. This will ensure that the straps are secured and won’t break in strong winds.

Check the installation to make sure that the straps are correctly secured.

When you install hurricane straps on any roof that is already in place, make sure to inspect the installation to make sure that the straps are properly secured. Most of the time the straps must be installed near the point at which the trusses or rafters meet the wall’s top plate. The straps must be long enough to extend past the ends of the rafters or trusses and must be secured with nails or screws that are at least 3 inches long.

In the end they are an essential component of protecting your home from damage caused by hurricanes. They are relatively easy to install and can be done within a few hours. If you reside in an area susceptible to hurricanes, be sure to take the time to set up hurricane straps on your current roof.

Should I put up My Own Roof in Artesia?
How to Install the Heat Tape On Roof in Artesia?

Request a
Free Quote

Our mission at SoCal Green Roofing & Builders is to be your go-to roofing contractor in the Los Angeles area. We provide services throughout the greater Los Angeles area, Orange, San Bernardino, and Ventura Counties.

CALL US NOW

Schedule Your Appointment

"*" indicates required fields

MM slash DD slash YYYY
This field is for validation purposes and should be left unchanged.