Installing hurricane straps is a relatively easy process which can be accomplished within a couple of hours. The first step is to pinpoint the whereabouts of the rafters on your roof. After the rafters are found, the second step will be to cut and measure the hurricane straps to an proper length. After the straps have been cut and trimmed, following is the process to nail or screw the straps to the rafters. After the hurricane straps are installed and secured, it is time installing these hurricane clips. The hurricane clips must be installed at the bottom of the rafters as well as on highest point of the rafters. The last step is to put in the roofing nails or screws.
An new Roof Installation in Lake Forest can be stressful and challenging. It is essential to hire a professional in order to get the perfect new Roof Installation in Lake Forest! SoCal Green is here to assist you with your roof maintenance and installations.
1. Check the roof for the number and placement of hurricane straps.
2. Purchase the necessary quantity of straps for hurricanes.
3. Install the hurricane straps on the roof that is already in place, and follow the instructions of the manufacturer.
4. Inspect the roof regularly to ensure you have hurricane-resistant straps in condition and operating properly.
Cut and measure the straps to size.
For installing hurricane straps on an already existing roofing structure, it is necessary take measurements and then cut them according to the size. Once the straps are cut to the correct dimensions, you’ll need to connect them to the roof. To do this, you’ll need to drill holes in the roof, and then screw the straps onto the roof. After the straps have been put installed, you’ll need to attach them to the hurricane clips. The hurricane clips need to be attached to the wall.
Drill holes in the straps to match the existing rafters.
If your house was constructed before Hurricane Andrew of 1992 chances are it doesn’t have the proper hurricane straps. This is why it’s crucial to put them in yourself to ensure your home is prepared for the next storm to hit. Here’s how:
1. Measure the width of your rafters. The straps should be wide enough to span at minimum two rafters.
2. Make holes for the straps in order to match the rafters already in place.
3. Attach the straps to rafters with screws or nails.
4. Repeat the process for the other the rafters on your roof.
If you take the time to put in hurricane straps, you can rest assured that your home is prepared for the next big storm.
Use a good amount of construction glue to the strap’s back.
Applying a substantial amount of construction adhesive to the back of the straps is a key step in making sure that they stay in place during a hurricane. Be sure to spread the glue evenly, and on each of the four straps. After the adhesive has been placed, press the straps firmly into their place on the roof.
Attach the straps to the existing rafters.
Straps for hurricanes are an essential element of securing your home from hurricanes. They help keep your roof attached to your walls during strong winds, and prevent it from being destroyed by the wind.
If your home doesn’t have hurricane straps, you could install them yourself. The first step is to identify the rafters on your roof. Then, attach the straps to the rafters using screws or nails. Make sure the straps are fastened securely so they can withstand high winds.
Make sure the straps are secured with nail or screws galvanized.
After you have installed those hurricane straps you must to secure them to your roof. It is crucial to ensure they’re secured, so make use of Galvanized nails or screws to make sure you have a secure fit. You’ll want to place the straps at least two feet apart, at the minimum. Also, make sure they are properly fastened to the trusses or rafters. If you’re unsure of how to accomplish this, you can consult a professional contractor.
Seal the straps with the caulk and sealant.
If you are installing hurricane straps on an existing roof, you’ll have to seal them with the caulk and sealant. This will ensure that the straps are secure and won’t come loose during high winds.
Inspect the installation to make sure that the straps are secured.
When installing hurricane straps on the roof of an already existing structure, be sure to examine the structure to ensure that the straps are properly secured. In most cases the straps need to be installed in the area where the rafters or trusses meet the top plate of the wall. The straps should be long enough to extend over the ends of the trusses or rafters and must be installed using nails or screws that are at least 3 inches long.
In conclusion, hurricane straps are an essential component of protecting your home from damage caused by hurricanes. Installing them is relatively simple and can be accomplished within a few hours. If you live in an area that is prone to hurricanes, make sure to take the time to put hurricane straps on your existing roof.
