The installation of hurricane straps is a relatively easy process which can be accomplished in a few hours. It is the first thing to identify the location of the rafters in your roof. Once the rafters are identified then the next step is to measure and cut the hurricane straps into the suitable length. After the straps have been cut and trimmed, it is now time to screw or nail the straps into the rafters. Once the hurricane straps are installed and secured, the next step is installing the clips for hurricanes. The hurricane clips must be placed at the bottom of the rafters and on top of the rafters. The final step is to install the roofing nails or screws.
The process of a new Roof Installation in West Whittier can be hectic and critical. It is essential to hire a professional in order to get a perfect new Roof Installation in West Whittier! SoCal Green can assist you with your roofing maintenance and installation needs.
1. Check the roof for the amount and location of hurricane straps.
2. Get the needed amount of straps for hurricanes.
3. Install the hurricane straps onto the existing roof, following the directions of the manufacturer.
4. Inspect the roof regularly to ensure you have hurricane-resistant straps in working order and operating effectively.
Cut the straps to the appropriate size.
In order to install hurricane straps onto the roof of your home, you’ll have be able to cut and measure the straps to the proper size. After you’ve got the straps cut to the right size, you’ll have to connect them to the roof. For this, drill holes in the roof, and then screw the straps in place. After the straps are in place, you’ll need attach them to hurricane clips. The hurricane clips need to be attached to the wall.
Drill holes in the straps to make them match with the rafters that are already in place.
If your home was constructed before Hurricane Andrew in 1992, it likely doesn’t have hurricane straps that are properly installed. That’s why it’s important to install them yourself in order to make sure that your home is properly prepared for the next big storm. Here’s how:
1. Take a measurement of the length of the rafters. The straps need to be wide enough to span at minimum two rafters.
2. Drill holes in the straps to match the rafters that are already in place.
3. Connect the straps to the rafters with screws or nails.
4. Repeat the procedure for all the rafters on your roof.
If you take the time to put in hurricane straps, you’ll be able to rest easy that your home is prepared for the next big storm.
Apply a large amount of construction glue to the back of the straps.
Applying a generous amount of construction glue to the back of the straps is the most important step in making sure that they stay in place during a storm. Be sure to spread the glue evenly and also to all four straps. After the adhesive has been put on, you can press the straps firmly into position on the roof.
Connect the straps to the existing rafters.
Hurricane straps are an important element of securing your home from hurricanes. They keep your roof attached to your walls in high winds, keeping it from being destroyed by the wind.
If your house doesn’t have hurricane straps, you can install them yourself. Begin by identifying the existing rafters in your roof. Then, secure the straps to the rafters by using nails or screws. Be sure that the straps are secured so they can withstand high winds.
Attach the straps using nail or screws galvanized.
Once you have those hurricane straps it is time to attach them to your roof. It is crucial to ensure that they are secure, so use nail or screws that are galvanized to guarantee a secure fit. You’ll want to place the straps about two feet apart at a minimum, and ensure that they’re securely attached with rafters or the trusses. If you’re not sure how to do this, consult a professional contractor.
Seal the straps with caulk or sealant.
If you’re installing hurricane straps to an already existing roofing structure, you’ll need to secure the straps using caulk or sealant. This will ensure that the straps are safe and won’t fall off in strong winds.
Examine the installation to be sure that the straps are secured.
When you install hurricane straps on any roof that is already in place, be certain to check the installation to ensure the straps are securely secured. Most of the time, the straps should be installed near the point at which the rafters or trusses meet the top plate of the wall. The straps should be long enough to extend over the end of the rafters or trusses and must be fixed using nails or screws that are at least 3 inches in length.
In conclusion they are a crucial element to protect your home from damage caused by hurricanes. Installation is fairly simple and can be completed in a few hours. If you reside in an area that is susceptible to hurricanes, be sure you take the time to put hurricane straps onto your existing roof.
How to Set Up the Synthetic Roof Underlayment in West Whittier?