Installing hurricane straps is a relatively easy process which can be accomplished in a few hours. It is the first thing to identify the position of the rafters within your roof. After the rafters are found, the second step will be to cut and measure the hurricane straps into the appropriate length. After the straps have been cut, it is now time to nail or screw the straps onto the rafters. Once the hurricane straps have been put in place then it is time installing these hurricane clips. The hurricane clips must be placed at the bottom of the rafters and on uppermost rafters. The final step is to install the roofing nails or screws.
An new Roof Installation in Lomita can be hectic and critical. You’ll need a professional order to have a flawless new Roof Installation in Lomita! SoCal Green will help you with roof maintenance and installations.
1. Assess the roof to determine the amount and location on the straps for hurricanes.
2. Buy the required amount of straps for hurricanes.
3. Install the hurricane straps on the roof that is already in place, and follow the instructions of the manufacturer.
4. Check the roof on a regular basis to ensure your hurricane straps remain in great working order and working correctly.
Measure and cut the straps according to size.
For installing hurricane straps on an existing roof, you’ll need to measure and cut the straps to the proper size. Once the straps are cut to the correct size, you’ll need to attach they to the roofing. For this, you’ll need drill holes in the roof before screwing the straps into place. After the straps have been put installed, you’ll need attach them to hurricane clips. The hurricane clips need to be attached on the walls.
Pre-drill holes in the straps to match the rafters that are already in place.
If your home was constructed prior to Hurricane Andrew which hit in 1992 it likely doesn’t have proper hurricane straps. It’s the reason it’s so important to install them yourself in order to ensure your home is prepared for the next major storm. Here’s how:
1. Find out the dimensions that your rafters are. The straps must be wide enough to span at minimum two rafters.
2. Drill holes in the straps to make them match with the existing rafters.
3. Attach the straps to the rafters by using nails or screws.
4. Repeat the process for the other rafters that are on your roof.
By taking the time to install hurricane straps you’ll be able to rest easy knowing that your home is equipped for the next storm.
Apply a generous amount of construction adhesive on the strap’s back.
Applying a generous amount of construction glue to the straps’ back is the most important step in making sure they remain in place in the event of a hurricane. Make sure you apply the adhesive evenly and on each of the four straps. Once the adhesive is put on, you can put the straps in a secure their place on the roof.
Connect the straps to the existing rafters.
The hurricane straps are an essential element of securing your home from hurricanes. They will ensure that your roof stays attached to your walls in high winds, keeping it from being removed.
If your house doesn’t have hurricane straps, it is possible to install them yourself. First, identify the rafters that are currently on your roof. Then, you can attach the straps to the rafters with nails or screws. Make sure the straps are securely fastened to withstand strong winds.
Secure the straps with nail or screws galvanized.
Once you have the hurricane ropes you need to secure them to your roof. The most important thing is to ensure they’re secure. Use galvanized screws or nails to ensure a secure fit. It is recommended to put the straps approximately two feet apart, at the minimum, and ensure that they are properly fastened with rafters or the trusses. If you’re not sure of how to accomplish this, you can consult an expert contractor.
Seal the straps with caulk or sealant.
If you are installing hurricane straps on an already existing roofing structure, you’ll have to seal them with sealing caulk, or sealant. This will make sure that the straps remain secured and won’t break in high winds.
Check the installation to make sure that the straps are correctly secured.
If you are installing hurricane straps onto any roof that is already in place, make sure to examine the installation to make sure that the straps are securely secured. Most of the time the straps need to be put in place near the point at which the trusses or rafters meet the top plate of the wall. The straps must be long enough to extend past the ends of the rafters or trusses, and they should be fixed using nails or screws that are at least 3 inches in length.
In the end the hurricane straps are a crucial part of protecting your home from the effects of hurricanes. They are relatively easy to install and can be completed within a couple of hours. If you reside in an area susceptible to hurricanes, make sure that you have the time to set up hurricane straps on your existing roof.
