Serving Residents in Los Angeles & Surrounding Areas
License# 1057764
Serving in Los Angeles & Surrounding Areas
License# 1057764
Blog

How To Set Up Clay Roofing Tiles In La Habra?

The clay roof tiles are an attractive and long-lasting alternative for roofing. They are installed using an installation process similar to installing other types of roofing materials. The steps below will guide you through the steps to install clay roof tiles.

The process of a new Roof Installation in La Habra can be hectic and critical. You’ll need a professional order to get a perfect new Roof Installation in La Habra! SoCal Green will assist you with your roof maintenance and installations.

1. The area to be prepared is where the tiles will be installed. This area should be free of vegetation and debris. If you’re working on a sloped roof, ensure that the roof is level.

2. Place a layer of either felt or synthetic underlayment over the area you have prepared. This will keep roofing materials safe from elements.

3. Start putting the tiles in at the bottom of the prepared area, working your way to the top. Make sure each tile is securely secured before moving on to the next tile.

4. Continue to install your tiles till the total area is completely fully covered.

5. Examine the tiles and make sure they’re secured. If you notice any tiles are loose, re-secure them.

6. Allow the tiles to cure for at least 24 hours before walking on them.

Fix the tiles to battens

Once you’ve installed the battens, it’s time to attach the tiles to them. You’ll need screws or nails for this, depending on the kind of tile you are using. Be sure to predrill the holes to accommodate nails or screws to avoid splitting the tile. Begin with the lowest row of tiles, and work your way up, overlapping each row as proceed. Once you have reached the top row, you might need to cut the tiles in order to fit. Make sure to use a tile cutter or nippers made for clay tiles so as to avoid damaging them.

Align tiles with the correct tiles with the correct overlap

To make sure that your tiles are in the right overlap make use of an appropriate level to draw an area in the center of your starting course. This line should be level with the tiles’ tops on the opposite side. Once your line is level, use a chalk line to snap a line perpendicular to the course that you started on. This line will allow you to make sure your tiles are in alignment as you install them.

Cut tiles to fit using an a-z tile cutter

Most clay roofing tiles are cut to fit with a tile cutter. You’ll have to ensure you have the appropriate dimension cutter to fit the size of tile that you’re working with. For smaller tiles, you can use a manual tile cutter. For larger tiles, you’ll require an electrical tile cutter.

First, draw a line on the tile you want to make the cut. Then, place the tile cutter onto the tile and score it on the line you have marked. Finally you can snap the tile across the score lines to split it.

Install half round tiles to corners

It is important to install half round tiles to the roof’s corners first. This will ensure that water will be directed away from the building and will not collect in the corners. After the half round tiles are in place The rest of the roof is able to be tiled in the same way.

Use mortar to fix tiles

Installing clay roofing tiles is more involved than installing different types of roofing but the result is worthwhile. Tiles made of clay are long-lasting and are extremely durable which makes them a great choice for areas with extreme weather conditions.

One of the most crucial actions to install clay roof tiles is to apply mortar to secure the tiles. Mortar is a type of cement that is used to bond the tiles to the roof. It is essential to choose the best quality mortar that is approved as suitable for use outdoors.

Apply sealant to tiles for additional waterproofing

After you have installed the battens, you can put in the roof tiles made of clay. Begin at the bottom and proceed to the top by applying sealant on the tiles to give them extra waterproofing. Make sure that the tiles are placed evenly and the sealant is properly applied to prevent leaks.

Inspect tiles for any damages or cracks.

When you are installing tiles for your roof made of clay make sure you inspect the tiles for any fractures or damages. Cracks can let water seep through the tiles and cause destruction to your roof. Be sure to examine the tiles for the proper dimensions and fit prior to installation.

In the end, putting up clay roofing tiles isn’t an easy task, however it is important to follow the steps attentively. Be sure to wear gloves and a mask for dust, and to be in a ventilated area. With a bit of caution and attention to detail you’ll be able install your clay roof tiles with ease.

Would Solar Panel Installation Affect My Roof in La Habra?

Request a
Free Quote

Our mission at SoCal Green Roofing & Builders is to be your go-to roofing contractor in the Los Angeles area. We provide services throughout the greater Los Angeles area, Orange, San Bernardino, and Ventura Counties.

CALL US NOW

Schedule Your Appointment

"*" indicates required fields

MM slash DD slash YYYY
This field is for validation purposes and should be left unchanged.